[Thu Jul  5 07:09:57 2012] Detection parameters:
  Position = (225.4, 311.8) = 16 36 17.60 -47 32 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.6 +/- 19.8
  Background counts = 105.3
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 07:09:57 2012] Off-axis axis estimate = 5.38'
[Thu Jul  5 13:36:11 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:36:11 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Jul  5 13:36:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.927
[Thu Jul  5 13:36:11 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.12"
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Jul  5 15:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31.csv
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Jul  5 15:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31.csv
[Thu Jul  5 15:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Jul  5 15:38:51 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu Jul  5 17:04:19 2012] Spatial fit model total counts = 799.953000, observed total counts = 800.000000
[Thu Jul  5 17:04:19 2012] Offset between fit and detection position for source 30 = 0.201523 pixels
[Thu Jul  5 17:04:19 2012] 806.575000 total counts/ 691.358000 bgd. counts: snr = 4.381926
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.201523 pixels
  Position = (225.3, 312.0) = 16 36 17.65 -47 32 53.7
  Extent = 6.4 (4.9-8.4)", rotation angle = 0
  Source counts = 115.2 +/- 28.4
  Background counts = 691.4
  Rate = 0.001 +/- 0.0003
[Thu Jul  5 17:04:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:19 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 17:04:19 2012] Source does appear to be extended
[Thu Jul  5 17:04:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 01:29:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:29:00 2012] Initial guess for spatial extent in simple fitting = 6.36"
[Fri Jul  6 01:29:00 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.038
[Fri Jul  6 01:29:00 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 6.36"
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27.csv
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27.csv
[Fri Jul  6 03:22:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul  6 03:22:05 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jul  6 04:35:25 2012] Spatial fit model total counts = 799.892000, observed total counts = 800.000000
[Fri Jul  6 04:35:25 2012] Offset between fit and detection position for source 30 = 0.001931 pixels
[Fri Jul  6 04:35:25 2012] 806.525000 total counts/ 692.067000 bgd. counts: snr = 4.350830
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.001931 pixels
  Position = (225.3, 312.0) = 16 36 17.65 -47 32 53.8
  Extent = 6.3 (4.9-8.4)", rotation angle = 0
  Source counts = 114.5 +/- 28.4
  Background counts = 692.1
  Rate = 0.001 +/- 0.0003
[Fri Jul  6 04:35:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:25 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:25 2012] Source does appear to be extended
[Fri Jul  6 04:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 07:58:59 2012] XMMSAS src. selection expression = ellipse(19550.614200, 27093.082000, 378.613211, 378.613211, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing source region out to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30_src.reg
[Fri Jul  6 07:58:59 2012] Extracting stamp from image fullrun_mos1_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (204, 290) - (247, 334)
[Fri Jul  6 07:58:59 2012] XMMSAS bgd. selection expression = annulus(19550.614200, 27093.082000, 631.022018, 1262.044036, X, Y)
[Fri Jul  6 07:58:59 2012] Writing fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30.gif
[Fri Jul  6 08:25:43 2012] Mean detx,y = (-2583.90, 5002.41) 
[Fri Jul  6 08:25:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:25:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:25:48 2012] Setting source spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul  6 08:25:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jul  6 10:03:50 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:50 2012] Error reading totcts from fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul  6 10:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:51 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src30.arf
[Fri Jul  6 10:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:51 2012] Updating source flux to 1.8e-14