[Thu Jul  5 07:09:57 2012] Detection parameters:
  Position = (407.5, 389.1) = 16 34 59.44 -47 27 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.3 +/- 31.4
  Background counts = 100.5
  Rate = 0.005 +/- 0.0003

[Thu Jul  5 07:09:57 2012] Off-axis axis estimate = 10.28'
[Thu Jul  5 13:36:11 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:36:11 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Thu Jul  5 13:36:11 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.052
[Thu Jul  5 13:36:11 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.57"
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22.csv
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22.csv
[Thu Jul  5 15:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul  5 15:38:51 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jul  5 17:04:19 2012] Source 25 is offset by 3.928301 and 8.631055 pixels which is larger than
2 X fitted extent = 1.304051 x 1.304051, not incorporating fit results
[Thu Jul  5 17:04:19 2012] Spatial fit model total counts = 1292.230000, observed total counts = 1291.000000
[Thu Jul  5 17:04:19 2012] Offset between fit and detection position for source 25 = 0.375200 pixels
[Thu Jul  5 17:04:19 2012] 1276.200000 total counts/ 1037.790000 bgd. counts: snr = 7.400648
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.375200 pixels
  Position = (407.4, 389.4) = 16 34 59.51 -47 27 16.6
  Extent = 4.3 (3.5-5.2)", rotation angle = 0
  Source counts = 238.4 +/- 35.7
  Background counts = 1037.8
  Rate = 0.003 +/- 0.0004
[Thu Jul  5 17:04:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:19 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 17:04:19 2012] Source does appear to be extended
[Thu Jul  5 17:04:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 01:29:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:29:00 2012] Initial guess for spatial extent in simple fitting = 4.26"
[Fri Jul  6 01:29:00 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.029
[Fri Jul  6 01:29:00 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 4.26"
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19.csv
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19.csv
[Fri Jul  6 03:22:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jul  6 03:22:05 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jul  6 04:35:25 2012] Spatial fit model total counts = 1291.400000, observed total counts = 1291.000000
[Fri Jul  6 04:35:25 2012] Offset between fit and detection position for source 25 = 0.014025 pixels
[Fri Jul  6 04:35:25 2012] 1274.247000 total counts/ 1036.770000 bgd. counts: snr = 7.375311
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.014025 pixels
  Position = (407.4, 389.4) = 16 34 59.50 -47 27 16.5
  Extent = 4.2 (3.5-5.2)", rotation angle = 0
  Source counts = 237.5 +/- 35.7
  Background counts = 1036.8
  Rate = 0.003 +/- 0.0004
[Fri Jul  6 04:35:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:25 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:25 2012] Source does appear to be extended
[Fri Jul  6 04:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 07:58:59 2012] XMMSAS src. selection expression = ellipse(35392.409400, 33831.164400, 250.519807, 250.519807, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing source region out to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25_src.reg
[Fri Jul  6 07:58:59 2012] Extracting stamp from image fullrun_mos1_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (393, 375) - (422, 404)
[Fri Jul  6 07:58:59 2012] XMMSAS bgd. selection expression = annulus(35392.409400, 33831.164400, 417.533012, 835.066024, X, Y) && !ellipse(37828.282420, 32167.270800, 2384.144069, 480.519214, 56.285000, X, Y) && !ellipse(34015.294891, 33532.161865, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25.gif
[Fri Jul  6 08:24:03 2012] Mean detx,y = (-9313.10, -10841.95) 
[Fri Jul  6 08:24:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:24:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:24:10 2012] Setting source spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul  6 08:24:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jul  6 10:03:50 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:50 2012] Error reading totcts from fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul  6 10:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:51 2012] Using photon index=1.80, rate=0.0028, arf fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src25.arf
[Fri Jul  6 10:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:51 2012] Updating source flux to 1.2e-13
[Fri Jul  6 10:03:55 2012] Flag b found in src. 25 procflags, skipping spectral fitting