[Thu Jul  5 07:09:57 2012] Detection parameters:
  Position = (461.2, 365.4) = 16 34 36.35 -47 29 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.2 +/- 18.9
  Background counts = 82.6
  Rate = 0.001 +/- 0.0002

[Thu Jul  5 07:09:57 2012] Off-axis axis estimate = 12.76'
[Thu Jul  5 13:36:11 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:36:11 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Thu Jul  5 13:36:11 2012] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.843
[Thu Jul  5 13:36:11 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 12.81"
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36.ximg exists
[Thu Jul  5 15:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36.csv
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Jul  5 15:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36.csv
[Thu Jul  5 15:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Jul  5 15:38:51 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Jul  5 17:04:19 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.176711 pixels away
[Thu Jul  5 17:04:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:19 2012] Assessing source extent using major
[Thu Jul  5 17:04:19 2012] Source does appear to be extended
[Thu Jul  5 17:04:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 01:29:00 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:29:00 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Fri Jul  6 01:29:00 2012] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.843
[Fri Jul  6 01:29:00 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 12.81"
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jul  6 03:22:05 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src32 appears to have run properly
[Fri Jul  6 03:22:06 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jul  6 03:22:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jul  6 03:22:06 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jul  6 03:22:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jul  6 03:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:25 2012] Warning, spatial fit 32 centroid is now closest to src. 1
[Fri Jul  6 04:35:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:25 2012] Assessing source extent using major
[Fri Jul  6 04:35:25 2012] Source does appear to be extended
[Fri Jul  6 04:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 07:58:59 2012] XMMSAS src. selection expression = ellipse(40079.679169, 31738.248840, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing source region out to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22_src.reg
[Fri Jul  6 07:58:59 2012] Extracting stamp from image fullrun_mos1_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (424, 328) - (499, 403)
[Fri Jul  6 07:58:59 2012] XMMSAS bgd. selection expression = annulus(40079.679169, 31738.248840, 1087.500000, 2175.000000, X, Y) && !ellipse(39396.842804, 32749.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38924.202454, 33268.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37566.600800, 32609.002000, 1091.160031, 1091.160031, 0.000000, X, Y) && !ellipse(37828.282420, 32167.270800, 2384.144069, 480.519214, 56.285000, X, Y) && !ellipse(37501.308533, 32921.404236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40870.854004, 29546.944305, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22.gif
[Fri Jul  6 08:27:07 2012] Mean detx,y = (-7206.09, -15283.61) 
[Fri Jul  6 08:27:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:27:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:27:23 2012] Setting source spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jul  6 08:27:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jul  6 09:12:54 2012] Not generating rmf since there are only 95 counts
[Fri Jul  6 09:12:54 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:51 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:51 2012] Error reading totcts from fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jul  6 10:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:51 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src22.arf
[Fri Jul  6 10:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:51 2012] Updating source flux to 5.8e-14
[Fri Jul  6 10:03:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting