[Thu Jul  5 07:09:57 2012] Detection parameters:
  Position = (403.4, 341.0) = 16 35 1.13 -47 30 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 897.4 +/- 40.1
  Background counts = 103.9
  Rate = 0.01 +/- 0.0004

[Thu Jul  5 07:09:57 2012] Off-axis axis estimate = 8.22'
[Thu Jul  5 13:36:11 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:36:11 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Thu Jul  5 13:36:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.878
[Thu Jul  5 13:36:11 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.54"
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 15:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul  5 15:38:51 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jul  5 17:04:19 2012] Spatial fit model total counts = 3000.570000, observed total counts = 2991.000000
[Thu Jul  5 17:04:19 2012] Offset between fit and detection position for source 19 = 4.642906 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.642906 pixels
  Position = (407.1, 338.2) = 16 34 59.56 -47 30 59.6
  Extent = 18.8 (18.1-19.1)", rotation angle = 0
  Source counts = 2631.5 +/- 51.3
  Background counts = 0.0
  Rate = 0.03 +/- 0.0006
 Deleting source due to low signal-to-noise ratio