[Tue May  8 12:46:48 2012] Detection parameters:
  Position = (206.4, 219.2) = 12 19 49.05 5 45 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12584.0 +/- 130.2
  Background counts = 306.1
  Rate = 0.1 +/- 0.001

[Tue May  8 12:47:03 2012] Off-axis axis estimate = 8.80'
[Tue May  8 13:10:18 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Tue May  8 13:10:18 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Tue May  8 13:10:18 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.895
[Tue May  8 13:10:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.83"
[Tue May  8 19:07:51 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2.ximg exists
[Tue May  8 19:07:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2.csv
[Tue May  8 19:07:51 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May  8 19:07:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2.csv
[Tue May  8 19:07:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:07:52 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May  8 19:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May  8 19:07:52 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May  8 19:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May  8 19:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 22:41:14 2012] Spatial fit model total counts = 18000.400000, observed total counts = 11079.000000
[Tue May  8 22:41:14 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 22:41:14 2012] Vigneting correction estimate = 1.000000
[Tue May  8 22:41:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 22:41:14 2012] Assessing source extent using major
[Tue May  8 22:41:14 2012] Source does appear to be extended
[Tue May  8 22:41:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 22:42:10 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Tue May  8 22:42:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 22:42:10 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Tue May  8 22:42:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.895
[Tue May  8 22:42:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.83"
[Wed May  9 03:46:11 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  9 03:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2.csv
[Wed May  9 03:46:11 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  9 03:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2.csv
[Wed May  9 03:46:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:46:12 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  9 03:46:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  9 03:46:12 2012] fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  9 03:46:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  9 03:46:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 07:23:25 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.879698 pixels away
[Wed May  9 07:23:25 2012] Vigneting correction estimate = 1.000000
[Wed May  9 07:23:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  9 07:23:25 2012] Assessing source extent using major
[Wed May  9 07:23:25 2012] Source does appear to be extended
[Wed May  9 07:23:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  9 07:24:20 2012] Counts = 12583.998047, rescaling region sizes by 3.000000
[Wed May  9 07:24:20 2012] XMMSAS src. selection expression = ellipse(17910.738113, 19026.246017, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed May  9 07:24:20 2012] Writing source region out to fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2_src.reg
[Wed May  9 07:24:20 2012] Extracting stamp from image fullrun_pn_xmm0502120101_pi300-10000_cl_sm2.00.img.gz, (94, 107) - (319, 332)
[Wed May  9 07:24:20 2012] XMMSAS bgd. selection expression = annulus(17910.738113, 19026.246017, 9787.500000, 19575.000000, X, Y) && !ellipse(14244.760000, 19851.578600, 458.073613, 458.073613, 0.000000, X, Y) && !ellipse(25598.485600, 23878.965000, 1793.714452, 1793.714452, 0.000000, X, Y) && !ellipse(17623.709534, 15880.429245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22850.416138, 12578.648087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20022.921448, 27328.688568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37274.762848, 33172.123962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12182.108841, 24040.049805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31157.548200, 23378.675400, 376.620011, 376.620011, 0.000000, X, Y) && !ellipse(23164.609650, 22442.749664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.092316, 21356.867905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34192.186218, 21346.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16071.482400, 20530.711200, 393.657611, 393.657611, 0.000000, X, Y) && !ellipse(18285.320267, 20318.000076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29741.013672, 18415.240143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27058.860596, 39451.549683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19463.558548, 36600.911102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18642.080536, 36321.206421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28758.875854, 8398.611778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20328.669700, 33700.286000, 430.244012, 430.244012, 0.000000, X, Y) && !ellipse(12944.758041, 27924.787781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28535.446000, 27047.554000, 1139.896033, 1139.896033, -0.000000, X, Y) && !ellipse(27334.588043, 26795.579926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.257202, 10586.150154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28102.624298, 26050.286652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.947662, 25767.703918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.642800, 25676.690000, 585.824017, 585.824017, 0.000000, X, Y) && !ellipse(20240.932541, 25446.036499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21891.254944, 25461.337433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.316711, 24304.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16176.050827, 23514.300903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.879578, 23047.477722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26064.214935, 22792.063904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15177.173050, 22920.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11163.336929, 22351.554718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37371.119171, 22279.821136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.603800, 21853.996000, 1322.744038, 1322.744038, 0.000000, X, Y) && !ellipse(34092.742096, 21970.862015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.626556, 22074.588699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25243.781677, 21554.293228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25731.263641, 21674.535522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.765167, 11017.287750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37536.195618, 19423.664078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19960.007258, 18470.059000, 382.324011, 382.324011, 0.000000, X, Y) && !ellipse(22631.191800, 16103.785600, 445.618413, 445.618413, 0.000000, X, Y) && !ellipse(18943.205994, 15888.578857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29928.402985, 15600.113907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30469.139526, 11265.282089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36134.454315, 11235.008118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.053040, 6954.753082, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  9 07:24:20 2012] Writing fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2.gif
[Wed May  9 07:32:09 2012] Mean detx,y = (9062.83, -1404.32) 
[Wed May  9 07:32:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  9 07:56:30 2012] Binned source spectrum to 10 counts/bin
[Wed May  9 07:56:31 2012] Setting source spectrum file to fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  9 07:56:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  9 11:24:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 11:24:42 2012] rmf not generated due to insufficient counts
[Wed May  9 20:58:37 2012] Updating aperture counts using extracted products
[Wed May  9 20:58:37 2012] Error reading totcts from fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  9 20:58:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 20:58:45 2012] Using photon index=1.80, rate=0.106, arf fullrun_pn_xmm0502120101_pi300-10000_pass1_cl_src2.arf
[Wed May  9 20:58:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 20:58:45 2012] Updating source flux to 4.3e-13
[Wed May  9 21:05:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting