[Tue May  8 12:47:16 2012] Detection parameters:
  Position = (206.4, 220.2) = 12 19 49.05 5 45 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5347.1 +/- 90.1
  Background counts = 156.9
  Rate = 0.07 +/- 0.001

[Tue May  8 12:47:24 2012] Off-axis axis estimate = 8.76'
[Tue May  8 20:50:23 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Tue May  8 20:50:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 20:50:23 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Tue May  8 20:50:23 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Tue May  8 20:50:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.81"
[Tue May  8 22:40:48 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_src2.ximg exists
[Tue May  8 22:40:48 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May  8 22:40:48 2012] Fit fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue May  8 22:40:49 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May  8 22:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May  8 22:40:49 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May  8 22:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May  8 22:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502120101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 22:41:40 2012] Warning, spatial fit 2 centroid is now closest to src. 20
[Tue May  8 22:41:40 2012] Vigneting correction estimate = 1.000000
[Tue May  8 22:41:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 22:41:40 2012] Assessing source extent using major
[Tue May  8 22:41:40 2012] Source does appear to be extended
[Tue May  8 22:41:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  9 05:29:32 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Wed May  9 05:29:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  9 05:29:32 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Wed May  9 05:29:32 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Wed May  9 05:29:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.81"
[Wed May  9 07:22:57 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  9 07:22:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2.csv
[Wed May  9 07:22:57 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  9 07:22:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2.csv
[Wed May  9 07:22:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 07:22:57 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  9 07:22:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  9 07:22:57 2012] fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  9 07:22:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  9 07:22:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502120101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 07:23:48 2012] Warning, spatial fit 2 centroid is now closest to src. 21
[Wed May  9 07:23:48 2012] Vigneting correction estimate = 1.000000
[Wed May  9 07:23:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  9 07:23:48 2012] Assessing source extent using major
[Wed May  9 07:23:48 2012] Source does appear to be extended
[Wed May  9 07:23:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  9 18:51:03 2012] Counts = 5347.099121, rescaling region sizes by 2.000000
[Wed May  9 18:51:03 2012] XMMSAS src. selection expression = ellipse(17910.290741, 19106.453125, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May  9 18:51:03 2012] Writing source region out to fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2_src.reg
[Wed May  9 18:51:03 2012] Extracting stamp from image fullrun_mos2_xmm0502120101_pi300-10000_cl_sm2.00.img.gz, (131, 145) - (281, 295)
[Wed May  9 18:51:03 2012] XMMSAS bgd. selection expression = annulus(17910.290741, 19106.453125, 4350.000000, 8700.000000, X, Y) && !ellipse(25599.215160, 23880.863000, 545.809616, 545.809616, 0.000000, X, Y) && !ellipse(14222.166977, 19860.952713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17604.205688, 15878.573380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19979.598007, 27416.254089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16058.463562, 20546.271530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18321.459198, 20383.876663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22837.899308, 12569.939630, 451.070172, 307.268756, 220.595461, X, Y) && !ellipse(23198.074020, 22442.210600, 343.617610, 343.617610, 0.000000, X, Y) && !ellipse(24703.002655, 24734.223145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19929.682129, 18311.148392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9420.719734, 20223.868668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18930.675583, 15883.652451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11136.766724, 22117.655930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12184.917862, 24049.576050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22581.281128, 16132.160538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.625600, 25484.125600, 665.569619, 345.969610, 338.095435, X, Y) && !ellipse(23661.753265, 10595.637238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21629.186000, 13023.448400, 1354.392039, 356.955210, 11.030800, X, Y) && !ellipse(26100.047211, 15994.599487, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed May  9 18:51:03 2012] Writing fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2.gif
[Wed May  9 18:53:13 2012] Mean detx,y = (-8865.55, 1300.82) 
[Wed May  9 18:53:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  9 19:00:31 2012] Binned source spectrum to 10 counts/bin
[Wed May  9 19:00:32 2012] Setting source spectrum file to fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  9 19:00:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  9 19:52:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 19:52:24 2012] rmf not generated due to insufficient counts
[Wed May  9 20:58:58 2012] Updating aperture counts using extracted products
[Wed May  9 20:58:59 2012] Error reading totcts from fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  9 20:59:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 20:59:03 2012] Using photon index=1.80, rate=0.0694, arf fullrun_mos2_xmm0502120101_pi300-10000_pass1_cl_src2.arf
[Wed May  9 20:59:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 20:59:03 2012] Updating source flux to 9.7e-13
[Wed May  9 21:02:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting