[Fri May 10 01:30:18 2013] Detection parameters:
  Position = (302.0, 306.8) = 9 18 23.15 16 20 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.9 +/- 35.2
  Background counts = 555.2
  Rate = 0.003 +/- 0.0006

[Fri May 10 01:30:18 2013] Off-axis axis estimate = 0.66'
[Fri May 10 01:54:02 2013] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Fri May 10 01:54:02 2013] Initial guess for spatial extent in simple fitting = 6.76"
[Fri May 10 01:54:02 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Fri May 10 01:54:02 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 6.76"
[Fri May 10 02:13:26 2013] fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 10 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3.csv
[Fri May 10 02:13:26 2013] fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 10 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3.csv
[Fri May 10 02:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 02:13:26 2013] fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 10 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 10 02:13:26 2013] fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 10 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 10 02:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:20 2013] Source 3 is offset by 2.361708 and 5.041453 pixels which is larger than
2 X fitted extent = 1.441761 x 6.215586, not incorporating fit results
[Fri May 10 04:16:20 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:20 2013] Assessing source extent using major
[Fri May 10 04:16:20 2013] Source does appear to be extended
[Fri May 10 04:16:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 04:16:20 2013] Deleting source due to low Poisson probability 0.9