[Fri May 10 01:31:07 2013] Detection parameters:
  Position = (366.5, 312.8) = 9 18 3.66 16 20 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 977.8 +/- 39.9
  Background counts = 99.4
  Rate = 0.01 +/- 0.0006

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 5.05'
[Fri May 10 03:04:24 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 10 03:04:24 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.95"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.912580 pixels away
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 10 05:20:21 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.95"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:44 2013] Warning, spatial fit 2 centroid is now closest to src. 19
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(31840.897583, 27167.124725, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (329, 275) - (404, 350)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(31840.897583, 27167.124725, 1087.500000, 2175.000000, X, Y) && !ellipse(31614.270880, 28474.400600, 546.528816, 415.680812, 90.000000, X, Y) && !ellipse(32998.195648, 27614.919312, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4.gif
[Fri May 10 07:29:53 2013] Mean detx,y = (7223.98, -1030.66) 
[Fri May 10 07:29:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:30:08 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:30:08 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 10 07:30:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 10 07:42:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 07:42:12 2013] rmf not generated due to insufficient counts
[Fri May 10 07:54:35 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:35 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1097.00
[Fri May 10 07:54:35 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 825.00
[Fri May 10 07:54:35 2013] Got source and background scale factors 1188056.000000, 4296666.000000
[Fri May 10 07:54:35 2013] User source parameters:
  Position = (366.5, 312.8) = 9 18 3.66 16 20 60.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 868.9 +/- 34.1
  Background aperture counts = 228.1
  Rate = 0.01 +/- 0.0004

[Fri May 10 07:54:35 2013] Updating counts from extracted products
[Fri May 10 07:54:35 2013] Set source signif. to 868.88/15.10 = 57.53
[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=0.00983, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 1.5e-13
[Fri May 10 07:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete