[Fri May 10 01:31:08 2013] Detection parameters:
  Position = (183.5, 238.5) = 9 18 58.97 16 15 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 21.3
  Background counts = 95.0
  Rate = 0.002 +/- 0.0002

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 9.40'
[Fri May 10 03:04:24 2013] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 11.13"
[Fri May 10 03:04:24 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.882
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.13"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:18 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May 10 04:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 10 04:16:18 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May 10 04:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 10 04:16:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Spatial fit model total counts = 499.006000, observed total counts = 425.000000
[Fri May 10 04:16:31 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 11.13"
[Fri May 10 05:20:21 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.882
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.13"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 10 06:05:32 2013] Fit fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 10 06:05:32 2013] Fit fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri May 10 06:05:44 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 13.381545 pixels away
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(15912.415710, 20702.165558, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (146, 201) - (221, 276)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(15912.415710, 20702.165558, 1087.500000, 2175.000000, X, Y) && !ellipse(14907.355698, 18883.279327, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26.gif
[Fri May 10 07:36:49 2013] Mean detx,y = (-9912.55, 342.06) 
[Fri May 10 07:36:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:36:59 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:36:59 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 10 07:36:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 10 07:52:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 07:52:52 2013] rmf not generated due to insufficient counts
[Fri May 10 07:54:37 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:37 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 324.00
[Fri May 10 07:54:37 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_bgd.pi.gz = 1757.00
[Fri May 10 07:54:37 2013] Got source and background scale factors 1126576.000000, 9494348.000000
[Fri May 10 07:54:37 2013] User source parameters:
  Position = (183.5, 238.5) = 9 18 58.97 16 15 29.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 115.5 +/- 19.0
  Background aperture counts = 208.5
  Rate = 0.001 +/- 0.0002

[Fri May 10 07:54:37 2013] Updating counts from extracted products
[Fri May 10 07:54:37 2013] Set source signif. to 115.52/14.44 = 8.00
[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=0.00131, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 2.2e-14
[Fri May 10 07:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete