[Fri May 10 01:31:08 2013] Detection parameters:
  Position = (282.4, 271.8) = 9 18 29.07 16 17 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.5 +/- 37.6
  Background counts = 134.9
  Rate = 0.003 +/- 0.0005

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 2.25'
[Fri May 10 03:04:24 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Fri May 10 03:04:24 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.650
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.55"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Warning, spatial fit 10 centroid is now closest to src. 2
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Fri May 10 05:20:21 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.650
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.55"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:44 2013] Source 22 is offset by 4.919389 and -3.118856 pixels which is larger than
2 X fitted extent = 1.011582 x 1.011582, not incorporating fit results
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(24523.936859, 23600.809723, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (245, 234) - (320, 309)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(24523.936859, 23600.809723, 1087.500000, 2175.000000, X, Y) && !ellipse(25391.925600, 23964.501400, 1438.408841, 1285.015237, 347.376200, X, Y) && !ellipse(24401.093964, 24304.578339, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22.gif
[Fri May 10 07:33:58 2013] Mean detx,y = (-490.64, 141.46) 
[Fri May 10 07:33:59 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:34:14 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:34:14 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri May 10 07:34:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri May 10 07:49:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 07:49:40 2013] rmf not generated due to insufficient counts
[Fri May 10 07:54:36 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:36 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 6770.00
[Fri May 10 07:54:36 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_bgd.pi.gz = 54.00
[Fri May 10 07:54:36 2013] Got source and background scale factors 661594.000000, 0.000000
[Fri May 10 07:54:36 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=0.00284, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 3.2e-14
[Fri May 10 07:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete