[Fri May 10 01:31:07 2013] Detection parameters:
  Position = (292.4, 276.0) = 9 18 26.06 16 18 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213706.9 +/- 538.2
  Background counts = 135.1
  Rate = 2 +/- 0.006

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 1.68'
[Fri May 10 03:04:24 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Fri May 10 03:04:24 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Spatial fit model total counts = 194000.000000, observed total counts = 170441.000000
[Fri May 10 04:16:31 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 04:16:31 2013] Source 2 is offset by 3.446890 and -0.937392 pixels which is larger than
2 X fitted extent = 1.699623 x 2.797090, not incorporating fit results
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Fri May 10 05:20:21 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 10 06:05:32 2013] Fit fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 06:05:32 2013] Fit fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 10 06:05:44 2013] Spatial fit model total counts = 165632.000000, observed total counts = 170441.000000
[Fri May 10 06:05:44 2013] Offset between fit and detection position for source 2 = 0.026591 pixels
[Fri May 10 06:05:44 2013] 165592.000000 total counts/ 25600.000000 bgd. counts: snr = 874.950000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.026591 pixels
  Position = (292.4, 276.0) = 9 18 26.06 16 18 20.7
  Extent = 6.0 (6.0-6.0)" x 5.4 (5.3-5.4)", rotation angle = 347 (346-349) degrees
  Source counts = 139992.0 +/- 406.9
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Fri May 10 07:26:14 2013] Counts = 139992.000000, rescaling region sizes by 3.000000
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(25391.925600, 23964.501400, 1078.806631, 963.761428, 347.376200, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (230, 214) - (354, 338)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(25391.925600, 23964.501400, 5394.033155, 10788.066310, X, Y) && !ellipse(31840.897583, 27167.124725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30188.521200, 16228.067400, 673.661619, 476.683214, 342.892863, X, Y) && !ellipse(24401.093964, 24304.578339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30033.035034, 35190.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28987.951782, 17855.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31614.270880, 28474.400600, 546.528816, 415.680812, 90.000000, X, Y) && !ellipse(36748.042206, 26860.200684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.936859, 23600.809723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.715515, 30755.274689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.195648, 27614.919312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.999451, 13955.290070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14907.355698, 18883.279327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15912.415710, 20702.165558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.345062, 14567.703110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31830.503143, 12586.315811, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2.gif
[Fri May 10 07:26:33 2013] Mean detx,y = (114.62, 73.27) 
[Fri May 10 07:26:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:29:46 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:29:46 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 10 07:29:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 10 07:54:34 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:34 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 177883.00
[Fri May 10 07:54:35 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 33336.00
[Fri May 10 07:54:35 2013] Got source and background scale factors 3030780.000000, 159945727.000000
[Fri May 10 07:54:35 2013] User source parameters:
  Position = (292.4, 276.0) = 9 18 26.06 16 18 20.7
  Extent = 6.0 (6.0-6.0)" x 5.4 (5.3-5.4)", rotation angle = 347 (346-349) degrees
  Source aperture counts = 177251.3 +/- 422.8
  Background aperture counts = 631.7
  Rate = 2 +/- 0.005

[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=1.58, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 1.6e-11
[Fri May 10 07:54:41 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Fri May 10 07:54:41 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete