[Fri May 10 01:31:08 2013] Detection parameters:
  Position = (364.2, 327.9) = 9 18 4.35 16 22 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.5 +/- 22.7
  Background counts = 96.8
  Rate = 0.003 +/- 0.0004

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 5.22'
[Fri May 10 03:04:24 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Fri May 10 03:04:24 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.04"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.443015 pixels away
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 9.04"
[Fri May 10 05:20:21 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.04"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 10 06:05:32 2013] Fit fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:44 2013] Source 19 is offset by 6.457348 and 6.625995 pixels which is larger than
2 X fitted extent = 1.028961 x 1.028961, not incorporating fit results
[Fri May 10 06:05:44 2013] Spatial fit model total counts = 626.185000, observed total counts = 572.000000
[Fri May 10 06:05:44 2013] Offset between fit and detection position for source 19 = 0.285871 pixels
[Fri May 10 06:05:44 2013] 608.488000 total counts/ 456.492000 bgd. counts: snr = 7.114028
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.285871 pixels
  Position = (363.9, 327.8) = 9 18 4.44 16 22 6.2
  Extent = 6.8 (5.1-9.0)" x 5.2 (4.0-6.5)", rotation angle = 90 (52-90) degrees
  Source counts = 152.0 +/- 24.7
  Background counts = 456.5
  Rate = 0.002 +/- 0.0003
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.77
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(31614.270880, 28474.400600, 409.896612, 311.760609, 90.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (340, 304) - (387, 351)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(31614.270880, 28474.400600, 683.161020, 1366.322039, X, Y) && !ellipse(31840.897583, 27167.124725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32998.195648, 27614.919312, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19.gif
[Fri May 10 07:33:20 2013] Mean detx,y = (7378.15, -2355.85) 
[Fri May 10 07:33:21 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:33:32 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:33:32 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri May 10 07:33:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri May 10 07:54:35 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:35 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 252.00
[Fri May 10 07:54:36 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_bgd.pi.gz = 374.00
[Fri May 10 07:54:36 2013] Got source and background scale factors 403200.000000, 1869287.000000
[Fri May 10 07:54:36 2013] User source parameters:
  Position = (363.9, 327.8) = 9 18 4.44 16 22 6.2
  Extent = 6.8 (5.1-9.0)" x 5.2 (4.0-6.5)", rotation angle = 90 (52-90) degrees
  Source aperture counts = 171.3 +/- 16.9
  Background aperture counts = 80.7
  Rate = 0.002 +/- 0.0002

[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 2.9e-14
[Fri May 10 07:54:41 2013] Flag b found in src. 19 procflags, skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete