[Fri May 10 01:31:07 2013] Detection parameters:
  Position = (238.3, 420.0) = 9 18 42.41 16 28 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 19.0
  Background counts = 88.5
  Rate = 0.001 +/- 0.0002

[Fri May 10 01:31:08 2013] Off-axis axis estimate = 9.83'
[Fri May 10 03:04:24 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:04:24 2013] Initial guess for spatial extent in simple fitting = 11.34"
[Fri May 10 03:04:24 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Fri May 10 03:04:24 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.34"
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26.ximg exists
[Fri May 10 04:16:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26.csv
[Fri May 10 04:16:17 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri May 10 04:16:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26.csv
[Fri May 10 04:16:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:18 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri May 10 04:16:18 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 10 04:16:18 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri May 10 04:16:18 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 10 04:16:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:31 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.669839 pixels away
[Fri May 10 04:16:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:31 2013] Assessing source extent using major
[Fri May 10 04:16:31 2013] Source does appear to be extended
[Fri May 10 04:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:20:21 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:20:21 2013] Initial guess for spatial extent in simple fitting = 11.34"
[Fri May 10 05:20:21 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Fri May 10 05:20:21 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.34"
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 10 06:05:32 2013] fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 10 06:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 10 06:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:44 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.305529 pixels away
[Fri May 10 06:05:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:44 2013] Assessing source extent using major
[Fri May 10 06:05:44 2013] Source does appear to be extended
[Fri May 10 06:05:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:26:14 2013] XMMSAS src. selection expression = ellipse(20687.286774, 36491.258392, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing source region out to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_src.reg
[Fri May 10 07:26:14 2013] Extracting stamp from image fullrun_mos2_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (201, 382) - (276, 457)
[Fri May 10 07:26:14 2013] XMMSAS bgd. selection expression = annulus(20687.286774, 36491.258392, 1087.500000, 2175.000000, X, Y)
[Fri May 10 07:26:14 2013] Writing fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15.gif
[Fri May 10 07:38:34 2013] Mean detx,y = (-669.40, -13290.62) 
[Fri May 10 07:38:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:38:43 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:38:43 2013] Setting source spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 10 07:38:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri May 10 07:53:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 07:53:17 2013] rmf not generated due to insufficient counts
[Fri May 10 07:54:38 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:38 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 366.00
[Fri May 10 07:54:38 2013] Total counts from fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1755.00
[Fri May 10 07:54:38 2013] Got source and background scale factors 1263912.000000, 10443934.000000
[Fri May 10 07:54:38 2013] User source parameters:
  Position = (238.3, 420.0) = 9 18 42.41 16 28 47.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 153.6 +/- 20.2
  Background aperture counts = 212.4
  Rate = 0.002 +/- 0.0002

[Fri May 10 07:54:38 2013] Updating counts from extracted products
[Fri May 10 07:54:38 2013] Set source signif. to 153.61/14.57 = 10.54
[Fri May 10 07:54:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:38 2013] Using photon index=1.80, rate=0.00174, arf fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15.arf
[Fri May 10 07:54:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:38 2013] Updating source flux to 3.6e-14
[Fri May 10 07:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:54:44 2013] xmm0502091601/analysis//spectral/fullrun_mos2_xmm0502091601_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete