[Fri May 10 01:30:43 2013] Detection parameters:
  Position = (176.4, 125.9) = 9 19 1.09 16 7 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.6 +/- 22.1
  Background counts = 81.6
  Rate = 0.002 +/- 0.0002

[Fri May 10 01:30:43 2013] Off-axis axis estimate = 15.32'
[Fri May 10 02:13:27 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri May 10 02:13:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 02:13:27 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Fri May 10 02:13:27 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri May 10 02:13:27 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 14.09"
[Fri May 10 03:04:23 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20.ximg exists
[Fri May 10 03:04:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20.csv
[Fri May 10 03:04:23 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May 10 03:04:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20.csv
[Fri May 10 03:04:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 03:04:24 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May 10 03:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May 10 03:04:24 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May 10 03:04:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri May 10 03:04:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:16:26 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 11.510866 pixels away
[Fri May 10 04:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:26 2013] Assessing source extent using major
[Fri May 10 04:16:26 2013] Source does appear to be extended
[Fri May 10 04:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 04:33:58 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri May 10 04:33:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 04:33:58 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Fri May 10 04:33:58 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri May 10 04:33:58 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 14.09"
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17.csv
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17.csv
[Fri May 10 05:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May 10 05:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:38 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 18.860610 pixels away
[Fri May 10 06:05:38 2013] Source 28 is offset by 1.865703 and 2.411496 pixels which is larger than
2 X fitted extent = 1.623163 x 1.623163, not incorporating fit results
[Fri May 10 06:05:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:38 2013] Assessing source extent using major
[Fri May 10 06:05:38 2013] Source does appear to be extended
[Fri May 10 06:05:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:09:12 2013] XMMSAS src. selection expression = ellipse(15294.038147, 10907.078148, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 07:09:12 2013] Writing source region out to fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_src.reg
[Fri May 10 07:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0502091601_pi300-10000_cl_sm2.00.img.gz, (139, 88) - (214, 163)
[Fri May 10 07:09:12 2013] XMMSAS bgd. selection expression = annulus(15294.038147, 10907.078148, 1087.500000, 2175.000000, X, Y) && !ellipse(14042.145370, 11776.543823, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 07:09:12 2013] Writing fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28.gif
[Fri May 10 07:16:41 2013] Mean detx,y = (9641.46, 13328.23) 
[Fri May 10 07:16:42 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 07:16:55 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 07:16:56 2013] Setting source spectrum file to fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri May 10 07:16:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri May 10 07:25:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 07:25:58 2013] rmf not generated due to insufficient counts
[Fri May 10 07:54:34 2013] Updating aperture counts using extracted products
[Fri May 10 07:54:34 2013] Total counts from fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 352.00
[Fri May 10 07:54:34 2013] Total counts from fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_bgd.pi.gz = 837.00
[Fri May 10 07:54:34 2013] Got source and background scale factors 1328040.000000, 5194953.000000
[Fri May 10 07:54:34 2013] User source parameters:
  Position = (176.4, 125.9) = 9 19 1.09 16 7 27.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 138.0 +/- 19.8
  Background aperture counts = 214.0
  Rate = 0.002 +/- 0.0002

[Fri May 10 07:54:34 2013] Updating counts from extracted products
[Fri May 10 07:54:34 2013] Set source signif. to 138.03/14.63 = 9.44
[Fri May 10 07:54:34 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:54:34 2013] Using photon index=1.80, rate=0.00156, arf fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28.arf
[Fri May 10 07:54:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:54:34 2013] Updating source flux to 3.9e-14
[Fri May 10 07:54:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:54:41 2013] xmm0502091601/analysis//spectral/fullrun_mos1_xmm0502091601_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete