[Fri May 10 01:30:42 2013] Detection parameters:
  Position = (333.3, 204.6) = 9 18 13.70 16 13 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 21.8
  Background counts = 132.4
  Rate = 0.003 +/- 0.0003

[Fri May 10 01:30:43 2013] Off-axis axis estimate = 7.26'
[Fri May 10 02:13:27 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May 10 02:13:27 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May 10 02:13:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.791
[Fri May 10 02:13:27 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.06"
[Fri May 10 03:04:23 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src12.ximg exists
[Fri May 10 03:04:23 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri May 10 03:04:23 2013] Fit fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_src12 appears to have run properly
[Fri May 10 03:04:24 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri May 10 03:04:24 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May 10 03:04:24 2013] Fit fullrun_mos1_xmm0502091601_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri May 10 04:16:26 2013] Spatial fit model total counts = 658.354000, observed total counts = 619.000000
[Fri May 10 04:16:26 2013] Offset between fit and detection position for source 22 = 0.028088 pixels
[Fri May 10 04:16:26 2013] 662.995000 total counts/ 526.056000 bgd. counts: snr = 5.970506
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.028088 pixels
  Position = (333.3, 204.6) = 9 18 13.71 16 13 10.3
  Extent = 6.0 (4.7-7.3)", rotation angle = 0
  Source counts = 136.9 +/- 25.7
  Background counts = 526.1
  Rate = 0.002 +/- 0.0003
[Fri May 10 04:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 10 04:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 04:16:26 2013] Assessing source extent using major axis lower bound
[Fri May 10 04:16:26 2013] Source does appear to be extended
[Fri May 10 04:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 04:33:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 04:33:58 2013] Initial guess for spatial extent in simple fitting = 5.97"
[Fri May 10 04:33:58 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.141
[Fri May 10 04:33:58 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 5.97"
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12.csv
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12.csv
[Fri May 10 05:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 10 05:20:21 2013] fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 10 05:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 10 05:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:05:38 2013] Warning, spatial fit 12 centroid is now closest to src. 3
[Fri May 10 06:05:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:05:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:05:38 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:05:38 2013] Source does appear to be extended
[Fri May 10 06:05:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 06:05:38 2013] Deleting source due to low Poisson probability 1.0