[Sat Mar 31 16:57:11 2012] Detection parameters:
  Position = (343.5, 302.9) = 7 42 18.21 49 47 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.5 +/- 54.6
  Background counts = 1848.2
  Rate = 0.005 +/- 0.001

[Sat Mar 31 16:57:11 2012] Off-axis axis estimate = 3.28'
[Sat Mar 31 17:25:52 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 17:25:52 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Sat Mar 31 17:25:52 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sat Mar 31 17:25:52 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.07"
[Sat Mar 31 20:20:41 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13.ximg exists
[Sat Mar 31 20:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13.csv
[Sat Mar 31 20:20:41 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Mar 31 20:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13.csv
[Sat Mar 31 20:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 20:20:41 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Mar 31 20:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Mar 31 20:20:41 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Mar 31 20:20:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Mar 31 20:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 22:25:01 2012] Warning, spatial fit 13 centroid is now closest to src. 10
[Sat Mar 31 22:25:01 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 22:25:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 22:25:01 2012] Assessing source extent using major
[Sat Mar 31 22:25:01 2012] Source does appear to be extended
[Sat Mar 31 22:25:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 22:25:01 2012] Source is confused with source 10
[Sat Mar 31 22:25:28 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 22:25:28 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Sat Mar 31 22:25:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sat Mar 31 22:25:28 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.07"
[Sun Apr  1 00:06:20 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13.ximg exists
[Sun Apr  1 00:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13.csv
[Sun Apr  1 00:06:20 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Apr  1 00:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13.csv
[Sun Apr  1 00:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 00:06:20 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Apr  1 00:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Apr  1 00:06:20 2012] fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Apr  1 00:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Apr  1 00:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 01:11:20 2012] Source 13 is offset by -5.485997 and 4.879643 pixels which is larger than
2 X fitted extent = 0.745094 x 0.745094, not incorporating fit results
[Sun Apr  1 01:11:20 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 01:11:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 01:11:20 2012] Assessing source extent using major
[Sun Apr  1 01:11:20 2012] Source does appear to be extended
[Sun Apr  1 01:11:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 01:11:42 2012] XMMSAS src. selection expression = ellipse(29833.804291, 26305.442932, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Apr  1 01:11:42 2012] Writing source region out to fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13_src.reg
[Sun Apr  1 01:11:42 2012] Extracting stamp from image fullrun_pn_xmm0502091001_pi300-10000_cl_sm2.00.img.gz, (306, 265) - (381, 340)
[Sun Apr  1 01:11:42 2012] XMMSAS bgd. selection expression = annulus(29833.804291, 26305.442932, 1087.500000, 2175.000000, X, Y) && !ellipse(26961.488600, 27733.485200, 1450.130442, 1450.130442, 0.000000, X, Y) && !ellipse(28639.837616, 28168.163696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29612.451843, 27877.443298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.857300, 27705.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28423.341217, 26863.275208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.801636, 26847.833557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27076.441400, 24677.266000, 791.336023, 791.336023, 0.000000, X, Y) && !ellipse(28863.003448, 26834.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.028800, 26351.078000, 1104.464032, 1104.464032, 0.000000, X, Y) && !ellipse(29880.413330, 28270.623932, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  1 01:11:42 2012] Writing fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13.gif
[Sun Apr  1 03:48:54 2012] Mean detx,y = (2690.94, 1244.01) 
[Sun Apr  1 03:49:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  1 03:50:13 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  1 03:50:13 2012] Setting source spectrum file to fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Apr  1 03:50:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Apr  1 05:24:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  1 05:24:58 2012] rmf not generated due to insufficient counts
[Sun Apr  1 07:34:36 2012] Updating aperture counts using extracted products
[Sun Apr  1 07:34:36 2012] Error reading totcts from fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Apr  1 07:34:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 07:34:38 2012] Using photon index=1.80, rate=0.00484, arf fullrun_pn_xmm0502091001_pi300-10000_pass1_cl_src13.arf
[Sun Apr  1 07:34:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 07:34:38 2012] Updating source flux to 1.3e-14
[Sun Apr  1 07:37:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting