[Sat Mar 31 16:57:52 2012] Detection parameters:
  Position = (310.6, 319.1) = 7 42 32.98 49 48 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49230.0 +/- 261.6
  Background counts = 102.1
  Rate = 0.7 +/- 0.003

[Sat Mar 31 16:57:53 2012] Off-axis axis estimate = 1.74'
[Sat Mar 31 20:20:41 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 20:20:41 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Mar 31 20:20:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Mar 31 20:20:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sat Mar 31 21:19:19 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 31 21:19:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 21:19:19 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 31 21:19:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 21:19:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 21:19:20 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 31 21:19:20 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 31 21:19:20 2012] Fit fullrun_mos1_xmm0502091001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 31 22:25:07 2012] Spatial fit model total counts = 43421.100000, observed total counts = 43217.000000
[Sat Mar 31 22:25:07 2012] Offset between fit and detection position for source 1 = 0.222820 pixels
[Sat Mar 31 22:25:07 2012] 43454.900000 total counts/ 9948.500000 bgd. counts: snr = 335.930137
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.222820 pixels
  Position = (310.4, 319.2) = 7 42 33.07 49 48 34.7
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 33506.4 +/- 208.5
  Background counts = 9948.5
  Rate = 0.5 +/- 0.003
[Sat Mar 31 22:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 22:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 22:25:07 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 22:25:07 2012] Source does appear to be extended
[Sat Mar 31 22:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 00:06:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  1 00:06:20 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Sun Apr  1 00:06:20 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Sun Apr  1 00:06:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.81"
[Sun Apr  1 00:37:24 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Apr  1 00:37:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 00:37:24 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Apr  1 00:37:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 00:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 00:37:24 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr  1 00:37:24 2012] fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr  1 00:37:24 2012] Fit fullrun_mos1_xmm0502091001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Apr  1 01:11:25 2012] Spatial fit model total counts = 43421.400000, observed total counts = 43217.000000
[Sun Apr  1 01:11:25 2012] Offset between fit and detection position for source 1 = 0.000033 pixels
[Sun Apr  1 01:11:25 2012] 43455.200000 total counts/ 9958.400000 bgd. counts: snr = 335.666915
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000033 pixels
  Position = (310.4, 319.2) = 7 42 33.07 49 48 34.7
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 33496.8 +/- 208.5
  Background counts = 9958.4
  Rate = 0.5 +/- 0.003
[Sun Apr  1 01:11:25 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 01:11:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 01:11:25 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 01:11:25 2012] Source does appear to be extended
[Sun Apr  1 01:11:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 05:36:01 2012] Counts = 33496.800000, rescaling region sizes by 3.000000
[Sun Apr  1 05:36:01 2012] XMMSAS src. selection expression = ellipse(26954.577400, 27722.319800, 1044.775830, 1044.775830, 0.000000, X, Y)
[Sun Apr  1 05:36:01 2012] Writing source region out to fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_src.reg
[Sun Apr  1 05:36:01 2012] Extracting stamp from image fullrun_mos1_xmm0502091001_pi300-10000_cl_sm2.00.img.gz, (250, 259) - (370, 379)
[Sun Apr  1 05:36:01 2012] XMMSAS bgd. selection expression = annulus(26954.577400, 27722.319800, 5223.879150, 10447.758301, X, Y) && !ellipse(30911.886902, 37804.475708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22270.114000, 37010.348400, 554.916016, 554.916016, 0.000000, X, Y) && !ellipse(23101.472000, 37544.102000, 1758.864051, 462.226413, 77.430000, X, Y) && !ellipse(19880.837555, 28514.408722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16816.874600, 21760.209200, 400.433612, 400.433612, 0.000000, X, Y) && !ellipse(16487.435318, 30921.867157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26754.519897, 36442.620911, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  1 05:36:01 2012] Writing fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1.gif
[Sun Apr  1 05:36:13 2012] Mean detx,y = (343.80, -258.05) 
[Sun Apr  1 05:36:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  1 05:39:47 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  1 05:39:47 2012] Setting source spectrum file to fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 05:39:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Apr  1 07:34:38 2012] Updating aperture counts using extracted products
[Sun Apr  1 07:34:39 2012] Error reading totcts from fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 07:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 07:34:40 2012] Using photon index=1.80, rate=0.456, arf fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 07:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 07:34:40 2012] Updating source flux to 4.1e-12
[Sun Apr  1 07:36:13 2012] Reading fit data from xmm0502091001/analysis//spectral/fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_pl.csv
[Sun Apr  1 07:36:13 2012] Spectral fit parameter nH value = 833351000000.0
[Sun Apr  1 07:36:13 2012] Spectral fit parameter PhoIndex value = 1.37677
[Sun Apr  1 07:36:13 2012] Failed to get F(0.3-8.0) from xmm0502091001/analysis//spectral/fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Apr  1 07:36:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 07:36:13 2012] Using Nh = 8.3e+11, photon index=1.38, rate=0.456, arf fullrun_mos1_xmm0502091001_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 07:36:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 07:36:13 2012] Updating source flux to 5.1e-12