[Tue Mar 13 10:28:03 2012] Detection parameters:
  Position = (220.0, 211.9) = 14 19 49.82 -26 46 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.7 +/- 21.9
  Background counts = 38.4
  Rate = 0.002 +/- 0.0002

[Tue Mar 13 10:28:06 2012] Off-axis axis estimate = 8.47'
[Tue Mar 13 10:28:43 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:28:43 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Tue Mar 13 10:28:43 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Tue Mar 13 10:28:43 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.66"
[Tue Mar 13 10:28:43 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15.ximg exists
[Tue Mar 13 10:28:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15.csv
[Tue Mar 13 10:28:43 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Mar 13 10:28:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15.csv
[Tue Mar 13 10:28:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:28:44 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 13 10:28:44 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 13 10:28:44 2012] Fit fullrun_mos2_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Mar 13 10:29:11 2012] Spatial fit model total counts = 639.001000, observed total counts = 639.000000
[Tue Mar 13 10:29:11 2012] Offset between fit and detection position for source 17 = 0.148646 pixels
[Tue Mar 13 10:29:11 2012] 645.529000 total counts/ 458.867000 bgd. counts: snr = 8.713899
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.148646 pixels
  Position = (219.9, 212.1) = 14 19 49.85 -26 46 35.3
  Extent = 5.5 (4.7-6.5)", rotation angle = 0
  Source counts = 186.7 +/- 25.4
  Background counts = 458.9
  Rate = 0.002 +/- 0.0002
[Tue Mar 13 10:29:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:29:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:29:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:29:11 2012] Source does appear to be extended
[Tue Mar 13 10:29:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:29:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:29:28 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Tue Mar 13 10:29:28 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.271
[Tue Mar 13 10:29:28 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.54"
[Tue Mar 13 10:29:29 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15.ximg exists
[Tue Mar 13 10:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15.csv
[Tue Mar 13 10:29:29 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Mar 13 10:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15.csv
[Tue Mar 13 10:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:29:32 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Mar 13 10:29:32 2012] fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Mar 13 10:29:32 2012] Fit fullrun_mos2_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Mar 13 10:29:52 2012] Warning, spatial fit 15 centroid is now closest to src. 10
[Tue Mar 13 10:29:52 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:29:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:29:52 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:29:52 2012] Source does appear to be extended
[Tue Mar 13 10:29:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:30:38 2012] XMMSAS src. selection expression = ellipse(19084.934860, 18400.008200, 332.542810, 332.542810, 0.000000, X, Y)
[Tue Mar 13 10:30:39 2012] Not overwriting source region fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src.reg
[Tue Mar 13 10:30:39 2012] Extracting stamp from image fullrun_mos2_xmm0502090201_pi300-10000_cl_sm2.00.img.gz, (201, 193) - (239, 231)
[Tue Mar 13 10:30:39 2012] XMMSAS bgd. selection expression = annulus(19084.934860, 18400.008200, 554.238016, 1108.476032, X, Y)
[Tue Mar 13 10:30:39 2012] Writing fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17.gif
[Tue Mar 13 10:30:41 2012] ../../xmm0502090201/products/events/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0502090201/products/events/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Tue Mar 13 10:30:41 2012] Mean detx,y = (10142.78, -6422.60) 
[Tue Mar 13 10:30:41 2012] ../../xmm0502090201/products/images/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src.img and ../../xmm0502090201/products/images/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Tue Mar 13 10:30:41 2012] ../../xmm0502090201/products/spectra/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0502090201/products/spectra/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Tue Mar 13 10:30:41 2012] Setting source spectrum file to fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 13 10:30:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Mar 13 10:30:41 2012] ../../xmm0502090201/products/lightcurves/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0502090201/products/lightcurves/fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Tue Mar 13 10:30:52 2012] fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17.rmf exists, delete to re-create
[Tue Mar 13 10:30:52 2012] fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Tue Mar 13 10:32:46 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:32:46 2012] Error reading totcts from fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 13 10:32:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:32:49 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0502090201_pi300-10000_pass1_cl_src17.arf
[Tue Mar 13 10:32:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:32:49 2012] Updating source flux to 4.8e-14