[Tue Mar 13 10:27:58 2012] Detection parameters:
  Position = (304.3, 320.9) = 14 19 22.45 -26 38 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 423602.0 +/- 776.4
  Background counts = 79.3
  Rate = 4 +/- 0.007

[Tue Mar 13 10:28:01 2012] Off-axis axis estimate = 1.68'
[Tue Mar 13 10:28:41 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:28:41 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Mar 13 10:28:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Mar 13 10:28:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Mar 13 10:28:42 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 10:28:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:28:42 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 10:28:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:28:42 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 10:28:42 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:28:42 2012] Fit fullrun_mos1_xmm0502090201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:28:58 2012] Spatial fit model total counts = 342869.000000, observed total counts = 369691.000000
[Tue Mar 13 10:28:58 2012] Offset between fit and detection position for source 1 = 0.191677 pixels
[Tue Mar 13 10:28:58 2012] 342628.000000 total counts/ 25600.000000 bgd. counts: snr = 1981.425000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191677 pixels
  Position = (304.1, 320.8) = 14 19 22.51 -26 38 42.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 317028.0 +/- 585.3
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Tue Mar 13 10:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:28:58 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:28:58 2012] Source does appear to be extended
[Tue Mar 13 10:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:29:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:29:27 2012] Initial guess for spatial extent in simple fitting = 6.21"
[Tue Mar 13 10:29:27 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.076
[Tue Mar 13 10:29:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.21"
[Tue Mar 13 10:29:28 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 10:29:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:29:28 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 10:29:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:29:28 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 10:29:28 2012] fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:29:28 2012] Fit fullrun_mos1_xmm0502090201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:29:42 2012] Spatial fit model total counts = 342881.000000, observed total counts = 369691.000000
[Tue Mar 13 10:29:42 2012] Offset between fit and detection position for source 1 = 0.000430 pixels
[Tue Mar 13 10:29:42 2012] 342639.000000 total counts/ 25600.000000 bgd. counts: snr = 1981.493750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000430 pixels
  Position = (304.1, 320.8) = 14 19 22.51 -26 38 42.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 317039.0 +/- 585.4
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Tue Mar 13 10:29:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:29:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:29:42 2012] Source does appear to be extended
[Tue Mar 13 10:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:30:31 2012] Counts = 317039.000000, rescaling region sizes by 3.000000
[Tue Mar 13 10:30:31 2012] XMMSAS src. selection expression = ellipse(26407.970800, 27859.558000, 1117.771808, 1117.771808, 0.000000, X, Y)
[Tue Mar 13 10:30:31 2012] Not overwriting source region fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 13 10:30:31 2012] Extracting stamp from image fullrun_mos1_xmm0502090201_pi300-10000_cl_sm2.00.img.gz, (240, 257) - (368, 385)
[Tue Mar 13 10:30:31 2012] XMMSAS bgd. selection expression = annulus(26407.970800, 27859.558000, 5588.859038, 11177.718076, X, Y) && !ellipse(18418.191800, 21264.520200, 508.251215, 508.251215, 0.000000, X, Y) && !ellipse(36943.072693, 35514.085480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36718.704132, 35010.991943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19069.834961, 18381.996521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33008.972412, 29840.917114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36293.830414, 30935.105133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.646200, 38607.358000, 1871.838046, 1871.838046, 0.000000, X, Y)
[Tue Mar 13 10:30:31 2012] Writing fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1.gif
[Tue Mar 13 10:30:32 2012] ../../xmm0502090201/products/events/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0502090201/products/events/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 10:30:32 2012] Mean detx,y = (247.34, -232.78) 
[Tue Mar 13 10:30:32 2012] ../../xmm0502090201/products/images/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0502090201/products/images/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 10:30:32 2012] ../../xmm0502090201/products/spectra/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0502090201/products/spectra/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 10:30:32 2012] Setting source spectrum file to fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:30:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 10:30:32 2012] ../../xmm0502090201/products/lightcurves/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0502090201/products/lightcurves/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 10:30:38 2012] fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Mar 13 10:30:38 2012] fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Mar 13 10:32:44 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:32:44 2012] Error reading totcts from fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:32:44 2012] Using photon index=1.80, rate=2.92, arf fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:32:44 2012] Updating source flux to 2.7e-11
[Tue Mar 13 10:32:54 2012] Reading fit data from xmm0502090201/analysis//spectral/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 10:32:54 2012] Spectral fit parameter nH value = 2.70955e+19
[Tue Mar 13 10:32:54 2012] Spectral fit parameter PhoIndex value = 1.9472
[Tue Mar 13 10:32:54 2012] Failed to get F(0.3-8.0) from xmm0502090201/analysis//spectral/fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 10:32:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:32:54 2012] Using Nh = 2.7e+19, photon index=1.95, rate=2.92, arf fullrun_mos1_xmm0502090201_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:32:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:32:54 2012] Updating source flux to 2.5e-11