[Tue Apr 10 17:10:44 2012] Detection parameters: Position = (263.3, 288.9) = 3 22 49.12 -37 11 51.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 172.9 +/- 27.6 Background counts = 250.0 Rate = 0.004 +/- 0.0006 [Tue Apr 10 17:10:45 2012] Off-axis axis estimate = 2.64' [Tue Apr 10 17:11:16 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting [Tue Apr 10 17:11:16 2012] Initial guess for spatial extent in simple fitting = 7.75" [Tue Apr 10 17:11:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961 [Tue Apr 10 17:11:16 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.75" [Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37.ximg exists [Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37.csv [Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37_1.ximg exists [Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37.csv [Tue Apr 10 17:11:17 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists [Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists [Tue Apr 10 17:11:17 2012] Fit fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly [Tue Apr 10 17:11:30 2012] Spatial fit model total counts = 1814.020000, observed total counts = 1816.000000 [Tue Apr 10 17:11:30 2012] Offset between fit and detection position for source 38 = 0.444961 pixels [Tue Apr 10 17:11:30 2012] 1806.434800 total counts/ 1771.100000 bgd. counts: snr = 0.839617 Spatial fit parameters: Offset between fit and detection position for source 38 = 0.444961 pixels Position = (262.9, 289.1) = 3 22 49.26 -37 11 51.7 Extent = 3.6 (2.3-5.3)", rotation angle = 0 Source counts = 35.3 +/- 42.5 Background counts = 1771.1 Rate = 0.0008 +/- 0.001 Deleting source due to low Poisson probability