[Tue Apr 10 17:10:44 2012] Detection parameters:
  Position = (308.6, 298.5) = 3 22 32.64 -37 11 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.5 +/- 20.6
  Background counts = 251.9
  Rate = 0.003 +/- 0.0006

[Tue Apr 10 17:10:45 2012] Off-axis axis estimate = 0.74'
[Tue Apr 10 17:11:16 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:16 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Apr 10 17:11:16 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.705
[Tue Apr 10 17:11:16 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 6.80"
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30.ximg exists
[Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30.csv
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30.csv
[Tue Apr 10 17:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Apr 10 17:11:17 2012] Fit fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Apr 10 17:11:30 2012] Source 31 is offset by -5.649155 and 5.743210 pixels which is larger than
2 X fitted extent = 1.934759 x 1.934759, not incorporating fit results
[Tue Apr 10 17:11:30 2012] Spatial fit model total counts = 1906.210000, observed total counts = 1899.000000
[Tue Apr 10 17:11:30 2012] Offset between fit and detection position for source 31 = 1.942744 pixels
[Tue Apr 10 17:11:30 2012] Warning, changing simple spatial fit ID from 30 to 35
[Tue Apr 10 17:11:30 2012] 1836.402000 total counts/ 1668.060000 bgd. counts: snr = 4.121797
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.942744 pixels
  Position = (306.9, 297.5) = 3 22 33.24 -37 11 15.2
  Extent = 13.3 (13.2-26.5)", rotation angle = 0
  Source counts = 168.3 +/- 42.9
  Background counts = 1668.1
  Rate = 0.004 +/- 0.001
[Tue Apr 10 17:11:30 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:11:30 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:11:30 2012] Source does appear to be extended
[Tue Apr 10 17:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:11:30 2012] Source is confused with source 32
[Tue Apr 10 17:11:30 2012] Source is confused with source 36
[Tue Apr 10 17:11:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:58 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Tue Apr 10 17:11:58 2012] source mask rpix=3.1, npix_max = 50, mask sum = 44, frac = 0.872
[Tue Apr 10 17:11:58 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.27"
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Apr 10 17:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28.csv
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Apr 10 17:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28.csv
[Tue Apr 10 17:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Apr 10 17:11:59 2012] Fit fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Apr 10 17:12:11 2012] Warning, spatial fit 28 centroid is now closest to src. 36
[Tue Apr 10 17:12:11 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:12:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:12:11 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:12:11 2012] Source does appear to be extended
[Tue Apr 10 17:12:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:12:38 2012] XMMSAS src. selection expression = ellipse(26655.330000, 25832.648000, 796.386023, 796.386023, 0.000000, X, Y)
[Tue Apr 10 17:12:38 2012] Not overwriting source region fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src.reg
[Tue Apr 10 17:12:38 2012] Extracting stamp from image fullrun_pn_xmm0502070201_pi300-10000_cl_sm2.00.img.gz, (261, 252) - (353, 343)
[Tue Apr 10 17:12:38 2012] XMMSAS bgd. selection expression = annulus(26655.330000, 25832.648000, 1327.310038, 2654.620076, X, Y) && !ellipse(24633.534800, 24348.474800, 2539.584073, 1911.789655, 30.281000, X, Y) && !ellipse(28449.680800, 28297.580200, 483.095214, 483.095214, 0.000000, X, Y) && !ellipse(24048.243225, 27430.540802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.299500, 26907.696503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26155.468000, 26657.260000, 1037.520030, 1037.520030, 0.000000, X, Y) && !ellipse(23211.264000, 26904.348000, 1252.304036, 1252.304036, 0.000000, X, Y) && !ellipse(24285.969238, 26130.181793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25926.620697, 26049.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25694.576000, 25122.070000, 1061.848031, 1061.848031, 0.000000, X, Y) && !ellipse(27482.805400, 24272.040400, 1194.080034, 1194.080034, 0.000000, X, Y) && !ellipse(25585.288000, 23856.407600, 1164.928034, 1164.928034, 0.000000, X, Y) && !ellipse(24680.505000, 22959.734200, 1098.696032, 1098.696032, 0.000000, X, Y)
[Tue Apr 10 17:12:38 2012] Writing fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31.gif
[Tue Apr 10 17:12:42 2012] ../../xmm0502070201/products/events/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0502070201/products/events/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Tue Apr 10 17:12:43 2012] Mean detx,y = (-1632.12, 1437.80) 
[Tue Apr 10 17:12:43 2012] ../../xmm0502070201/products/images/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src.img and ../../xmm0502070201/products/images/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Tue Apr 10 17:12:43 2012] ../../xmm0502070201/products/spectra/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0502070201/products/spectra/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Tue Apr 10 17:12:43 2012] Setting source spectrum file to fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Apr 10 17:12:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Apr 10 17:12:43 2012] ../../xmm0502070201/products/lightcurves/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0502070201/products/lightcurves/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Tue Apr 10 17:12:53 2012] fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31.rmf exists, delete to re-create
[Tue Apr 10 17:12:53 2012] fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Tue Apr 10 17:14:13 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:14:13 2012] Error reading totcts from fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Apr 10 17:14:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:14:14 2012] Using photon index=1.80, rate=0.00402, arf fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src31.arf
[Tue Apr 10 17:14:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:14:14 2012] Updating source flux to 1.2e-14
[Tue Apr 10 17:14:22 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Tue Apr 10 17:14:22 2012] Flag c found in src. 31 procflags, skipping spectral fitting