[Tue Apr 10 17:10:44 2012] Detection parameters:
  Position = (279.7, 300.9) = 3 22 43.16 -37 11 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.7 +/- 34.2
  Background counts = 256.9
  Rate = 0.007 +/- 0.0007

[Tue Apr 10 17:10:45 2012] Off-axis axis estimate = 1.37'
[Tue Apr 10 17:11:16 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:16 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Tue Apr 10 17:11:16 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Tue Apr 10 17:11:16 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.11"
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29.ximg exists
[Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29.csv
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Apr 10 17:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29.csv
[Tue Apr 10 17:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Apr 10 17:11:17 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Apr 10 17:11:17 2012] Fit fullrun_pn_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Apr 10 17:11:30 2012] Source 30 is offset by -5.310492 and 6.445446 pixels which is larger than
2 X fitted extent = 6.112598 x 6.112598, not incorporating fit results
[Tue Apr 10 17:11:30 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:11:30 2012] Assessing source extent using major
[Tue Apr 10 17:11:30 2012] Source does appear to be extended
[Tue Apr 10 17:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:11:58 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:58 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Tue Apr 10 17:11:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Tue Apr 10 17:11:58 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.11"
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27.ximg exists
[Tue Apr 10 17:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27.csv
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Apr 10 17:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27.csv
[Tue Apr 10 17:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Apr 10 17:11:59 2012] fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Apr 10 17:11:59 2012] Fit fullrun_pn_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Apr 10 17:12:11 2012] Source 30 is offset by 0.640469 and -2.393520 pixels which is larger than
2 X fitted extent = 6.713701 x 0.839214, not incorporating fit results
[Tue Apr 10 17:12:11 2012] Source 30 is offset by -5.312285 and 6.445446 pixels which is larger than
2 X fitted extent = 6.057517 x 6.057517, not incorporating fit results
[Tue Apr 10 17:12:11 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 21.260303 pixels away
[Tue Apr 10 17:12:11 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:12:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:12:11 2012] Assessing source extent using major
[Tue Apr 10 17:12:11 2012] Source does appear to be extended
[Tue Apr 10 17:12:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:12:38 2012] XMMSAS src. selection expression = ellipse(24285.969238, 26130.181793, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 17:12:38 2012] Not overwriting source region fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src.reg
[Tue Apr 10 17:12:38 2012] Extracting stamp from image fullrun_pn_xmm0502070201_pi300-10000_cl_sm2.00.img.gz, (242, 263) - (317, 338)
[Tue Apr 10 17:12:38 2012] XMMSAS bgd. selection expression = annulus(24285.969238, 26130.181793, 1087.500000, 2175.000000, X, Y) && !ellipse(24633.534800, 24348.474800, 2539.584073, 1911.789655, 30.281000, X, Y) && !ellipse(22366.736000, 27568.786800, 344.896810, 344.896810, 0.000000, X, Y) && !ellipse(22918.642426, 27425.998047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24048.243225, 27430.540802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.299500, 26907.696503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26155.468000, 26657.260000, 1037.520030, 1037.520030, 0.000000, X, Y) && !ellipse(23211.264000, 26904.348000, 1252.304036, 1252.304036, 0.000000, X, Y) && !ellipse(26655.330000, 25832.648000, 1061.848031, 1061.848031, 0.000000, X, Y) && !ellipse(25926.620697, 26049.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22876.961121, 25614.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25694.576000, 25122.070000, 1061.848031, 1061.848031, 0.000000, X, Y) && !ellipse(27482.805400, 24272.040400, 1194.080034, 1194.080034, 0.000000, X, Y) && !ellipse(25585.288000, 23856.407600, 1164.928034, 1164.928034, 0.000000, X, Y) && !ellipse(24680.505000, 22959.734200, 1098.696032, 1098.696032, 0.000000, X, Y)
[Tue Apr 10 17:12:38 2012] Writing fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30.gif
[Tue Apr 10 17:12:42 2012] ../../xmm0502070201/products/events/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0502070201/products/events/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Apr 10 17:12:42 2012] Mean detx,y = (496.40, 1465.66) 
[Tue Apr 10 17:12:42 2012] ../../xmm0502070201/products/images/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0502070201/products/images/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Apr 10 17:12:42 2012] ../../xmm0502070201/products/spectra/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0502070201/products/spectra/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Tue Apr 10 17:12:42 2012] Setting source spectrum file to fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 17:12:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Apr 10 17:12:42 2012] ../../xmm0502070201/products/lightcurves/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0502070201/products/lightcurves/fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Apr 10 17:12:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 17:12:53 2012] rmf not generated due to insufficient counts
[Tue Apr 10 17:12:53 2012] fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Tue Apr 10 17:14:13 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:14:13 2012] Error reading totcts from fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 17:14:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:14:14 2012] Using photon index=1.80, rate=0.00739, arf fullrun_pn_xmm0502070201_pi300-10000_pass1_cl_src30.arf
[Tue Apr 10 17:14:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:14:14 2012] Updating source flux to 1.8e-14
[Tue Apr 10 17:14:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting