[Tue Apr 10 17:10:48 2012] Detection parameters:
  Position = (263.6, 478.9) = 3 22 48.98 -36 58 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.4 +/- 16.9
  Background counts = 78.6
  Rate = 0.002 +/- 0.0005

[Tue Apr 10 17:10:48 2012] Off-axis axis estimate = 13.33'
[Tue Apr 10 17:11:19 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:19 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Apr 10 17:11:19 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.934
[Tue Apr 10 17:11:19 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 13.09"
[Tue Apr 10 17:11:19 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50.ximg exists
[Tue Apr 10 17:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50.csv
[Tue Apr 10 17:11:19 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue Apr 10 17:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50.csv
[Tue Apr 10 17:11:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:20 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue Apr 10 17:11:20 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue Apr 10 17:11:20 2012] Fit fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Tue Apr 10 17:11:43 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 11.462453 pixels away
[Tue Apr 10 17:11:43 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:11:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:11:43 2012] Assessing source extent using major
[Tue Apr 10 17:11:43 2012] Source does appear to be extended
[Tue Apr 10 17:11:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:12:00 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:12:00 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Apr 10 17:12:00 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.934
[Tue Apr 10 17:12:00 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 13.09"
[Tue Apr 10 17:12:01 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48.ximg exists
[Tue Apr 10 17:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48.csv
[Tue Apr 10 17:12:01 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue Apr 10 17:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48.csv
[Tue Apr 10 17:12:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:12:02 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue Apr 10 17:12:02 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue Apr 10 17:12:02 2012] Fit fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue Apr 10 17:12:23 2012] Source 78 is offset by -6.802183 and -3.481382 pixels which is larger than
2 X fitted extent = 2.362690 x 2.362690, not incorporating fit results
[Tue Apr 10 17:12:23 2012] Spatial fit model total counts = 426.107000, observed total counts = 438.000000
[Tue Apr 10 17:12:23 2012] Offset between fit and detection position for source 78 = 6.906619 pixels
[Tue Apr 10 17:12:23 2012] 421.964900 total counts/ 10.950900 bgd. counts: snr = 124.202892
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 6.906619 pixels
  Position = (256.9, 480.5) = 3 22 51.43 -36 57 59.2
  Extent = 22.2 (21.1-25.5)", rotation angle = 0
  Source counts = 411.0 +/- 20.5
  Background counts = 11.0
  Rate = 0.007 +/- 0.0004
[Tue Apr 10 17:12:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:12:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:12:23 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:12:23 2012] Source does appear to be extended
[Tue Apr 10 17:12:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:12:58 2012] XMMSAS src. selection expression = ellipse(22299.274000, 41753.183600, 1334.904038, 1334.904038, 0.000000, X, Y)
[Tue Apr 10 17:12:58 2012] Not overwriting source region fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src.reg
[Tue Apr 10 17:12:58 2012] Extracting stamp from image fullrun_mos2_xmm0502070201_pi300-10000_cl_sm2.00.img.gz, (180, 404) - (334, 557)
[Tue Apr 10 17:12:58 2012] XMMSAS bgd. selection expression = annulus(22299.274000, 41753.183600, 2224.840064, 4449.680128, X, Y) && !ellipse(21813.230000, 40245.100800, 1644.432047, 1644.432047, 0.000000, X, Y) && !ellipse(26540.864380, 38709.742462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.907623, 41408.051392, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 17:12:58 2012] Writing fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78.gif
[Tue Apr 10 17:13:01 2012] ../../xmm0502070201/products/events/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src.evt and ../../xmm0502070201/products/events/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_bgd.evt exist, delete to re-create
[Tue Apr 10 17:13:01 2012] Mean detx,y = (-4005.48, -16631.95) 
[Tue Apr 10 17:13:01 2012] ../../xmm0502070201/products/images/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src.img and ../../xmm0502070201/products/images/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_bgd.img exist, delete to re-create
[Tue Apr 10 17:13:01 2012] ../../xmm0502070201/products/spectra/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src_b10.pi.gz and ../../xmm0502070201/products/spectra/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_bgd.pi exist, delete to re-create
[Tue Apr 10 17:13:01 2012] Setting source spectrum file to fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Apr 10 17:13:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Tue Apr 10 17:13:01 2012] ../../xmm0502070201/products/lightcurves/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src.lc and ../../xmm0502070201/products/lightcurves/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_bgd.lc exist, delete to re-create
[Tue Apr 10 17:13:06 2012] fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78.rmf exists, delete to re-create
[Tue Apr 10 17:13:06 2012] fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78.arf exists, delete to re-create
[Tue Apr 10 17:14:17 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:14:17 2012] Error reading totcts from fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Apr 10 17:14:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:14:18 2012] Using photon index=1.80, rate=0.00748, arf fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src78.arf
[Tue Apr 10 17:14:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:14:18 2012] Updating source flux to 2.1e-13
[Tue Apr 10 17:14:21 2012] Flag b found in src. 78 procflags, skipping spectral fitting