[Tue Apr 10 17:10:46 2012] Detection parameters:
  Position = (111.0, 370.1) = 3 23 44.50 -37 5 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.9 +/- 19.4
  Background counts = 97.4
  Rate = 0.004 +/- 0.0005

[Tue Apr 10 17:10:48 2012] Off-axis axis estimate = 14.55'
[Tue Apr 10 17:11:19 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:11:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 17:11:19 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Tue Apr 10 17:11:19 2012] source mask rpix=3.2, npix_max = 53, mask sum = 57, frac = 1.069
[Tue Apr 10 17:11:19 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 13.70"
[Tue Apr 10 17:11:19 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22.ximg exists
[Tue Apr 10 17:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22.csv
[Tue Apr 10 17:11:19 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Apr 10 17:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22.csv
[Tue Apr 10 17:11:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:11:20 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Apr 10 17:11:20 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Apr 10 17:11:20 2012] Fit fullrun_mos2_xmm0502070201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue Apr 10 17:11:43 2012] Warning, spatial fit 22 centroid is now closest to src. 13
[Tue Apr 10 17:11:43 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:11:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:11:43 2012] Assessing source extent using major
[Tue Apr 10 17:11:43 2012] Source does appear to be extended
[Tue Apr 10 17:11:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:11:43 2012] Source is confused with source 13
[Tue Apr 10 17:12:00 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:12:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 17:12:00 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Tue Apr 10 17:12:00 2012] source mask rpix=3.2, npix_max = 53, mask sum = 57, frac = 1.069
[Tue Apr 10 17:12:00 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.70"
[Tue Apr 10 17:12:01 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src21.ximg exists
[Tue Apr 10 17:12:01 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Apr 10 17:12:01 2012] Fit fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_src21 appears to have run properly
[Tue Apr 10 17:12:02 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Apr 10 17:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Apr 10 17:12:02 2012] fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Apr 10 17:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Apr 10 17:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502070201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:12:23 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 28.294454 pixels away
[Tue Apr 10 17:12:23 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 32.113797 pixels away
[Tue Apr 10 17:12:23 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 32.267130 pixels away
[Tue Apr 10 17:12:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:12:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:12:23 2012] Assessing source extent using major
[Tue Apr 10 17:12:23 2012] Source does appear to be extended
[Tue Apr 10 17:12:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:12:57 2012] XMMSAS src. selection expression = ellipse(9606.651436, 32153.237885, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 17:12:57 2012] Not overwriting source region fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src.reg
[Tue Apr 10 17:12:57 2012] Extracting stamp from image fullrun_mos2_xmm0502070201_pi300-10000_cl_sm2.00.img.gz, (73, 333) - (148, 408)
[Tue Apr 10 17:12:57 2012] XMMSAS bgd. selection expression = annulus(9606.651436, 32153.237885, 1087.500000, 2175.000000, X, Y) && !ellipse(9362.224000, 31503.844000, 1745.184050, 1745.184050, 0.000000, X, Y) && !ellipse(10303.832508, 29445.450753, 567.452045, 502.357656, 25.294078, X, Y)
[Tue Apr 10 17:12:57 2012] Writing fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11.gif
[Tue Apr 10 17:12:59 2012] ../../xmm0502070201/products/events/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0502070201/products/events/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Apr 10 17:12:59 2012] Mean detx,y = (-15594.82, -6076.85) 
[Tue Apr 10 17:12:59 2012] ../../xmm0502070201/products/images/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src.img and ../../xmm0502070201/products/images/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Apr 10 17:12:59 2012] ../../xmm0502070201/products/spectra/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0502070201/products/spectra/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Apr 10 17:12:59 2012] Setting source spectrum file to fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 17:12:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Apr 10 17:12:59 2012] ../../xmm0502070201/products/lightcurves/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0502070201/products/lightcurves/fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Apr 10 17:13:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 17:13:06 2012] rmf not generated due to insufficient counts
[Tue Apr 10 17:13:06 2012] fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Apr 10 17:14:17 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:14:17 2012] Error reading totcts from fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 17:14:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:14:18 2012] Using photon index=1.80, rate=0.0037, arf fullrun_mos2_xmm0502070201_pi300-10000_pass1_cl_src11.arf
[Tue Apr 10 17:14:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:14:18 2012] Updating source flux to 1.1e-13
[Tue Apr 10 17:14:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting