[Mon Oct 31 16:04:38 2011] Detection parameters:
  Position = (346.9, 309.9) = 13 12 44.75 -19 28 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.8 +/- 28.9
  Background counts = 324.3
  Rate = 0.002 +/- 0.0004

[Mon Oct 31 16:04:40 2011] Off-axis axis estimate = 3.61'
[Mon Oct 31 16:09:44 2011] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 16:09:44 2011] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Oct 31 16:09:44 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.698
[Mon Oct 31 16:09:44 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 8.23"
[Mon Oct 31 17:48:20 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27.ximg exists
[Mon Oct 31 17:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27.csv
[Mon Oct 31 17:48:20 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Oct 31 17:48:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27.csv
[Mon Oct 31 17:48:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 17:48:21 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Oct 31 17:48:21 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Oct 31 17:48:21 2011] Fit fullrun_pn_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Oct 31 19:09:15 2011] Source 27 is offset by -7.650607 and 4.560765 pixels which is larger than
2 X fitted extent = 0.946600 x 0.946600, not incorporating fit results
[Mon Oct 31 19:09:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 19:09:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 19:09:15 2011] Assessing source extent using major
[Mon Oct 31 19:09:15 2011] Source does appear to be extended
[Mon Oct 31 19:09:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 19:09:38 2011] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 19:09:38 2011] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Oct 31 19:09:38 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.698
[Mon Oct 31 19:09:38 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 8.23"
[Mon Oct 31 21:02:59 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25.ximg exists
[Mon Oct 31 21:02:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25.csv
[Mon Oct 31 21:02:59 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Oct 31 21:02:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25.csv
[Mon Oct 31 21:02:59 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 21:02:59 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Oct 31 21:02:59 2011] fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Oct 31 21:02:59 2011] Fit fullrun_pn_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Oct 31 23:10:52 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.446315 pixels away
[Mon Oct 31 23:10:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:10:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:10:52 2011] Assessing source extent using major
[Mon Oct 31 23:10:52 2011] Source does appear to be extended
[Mon Oct 31 23:10:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 23:11:22 2011] XMMSAS src. selection expression = ellipse(30133.679230, 26914.538513, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Oct 31 23:11:22 2011] Writing source region out to fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27_src.reg
[Mon Oct 31 23:11:22 2011] Extracting stamp from image fullrun_pn_xmm0502070101_pi300-10000_cl_sm2.00.img.gz, (309, 272) - (384, 347)
[Mon Oct 31 23:11:22 2011] XMMSAS bgd. selection expression = annulus(30133.679230, 26914.538513, 1087.500000, 2175.000000, X, Y) && !ellipse(30771.790940, 29255.705587, 440.191482, 350.829583, 58.777394, X, Y) && !ellipse(28393.868800, 25713.835000, 410.984012, 410.984012, 0.000000, X, Y)
[Mon Oct 31 23:11:22 2011] Writing fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27.gif
[Tue Nov  1 00:07:17 2011] Mean detx,y = (-5306.42, 642.68) 
[Tue Nov  1 00:07:22 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 00:07:48 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 00:07:48 2011] Setting source spectrum file to fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Nov  1 00:07:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Nov  1 01:40:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov  1 01:40:23 2011] rmf not generated due to insufficient counts
[Tue Nov  1 05:04:29 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:04:29 2011] Error reading totcts from fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Nov  1 05:04:31 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:04:31 2011] Using photon index=1.80, rate=0.00239, arf fullrun_pn_xmm0502070101_pi300-10000_pass1_cl_src27.arf
[Tue Nov  1 05:04:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 05:04:31 2011] Updating source flux to 8.1e-15
[Tue Nov  1 05:08:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting