[Mon Oct 31 16:04:42 2011] Detection parameters:
  Position = (293.8, 276.8) = 13 13 1.11 -19 31 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1542.7 +/- 49.8
  Background counts = 97.5
  Rate = 0.01 +/- 0.0004

[Mon Oct 31 16:04:43 2011] Off-axis axis estimate = 1.61'
[Mon Oct 31 18:19:42 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 18:19:42 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Oct 31 18:19:42 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Mon Oct 31 18:19:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Mon Oct 31 19:09:06 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Oct 31 19:09:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1.csv
[Mon Oct 31 19:09:06 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Oct 31 19:09:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1.csv
[Mon Oct 31 19:09:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 19:09:07 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 19:09:07 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 19:09:07 2011] Fit fullrun_mos2_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 19:09:25 2011] Spatial fit model total counts = 2472.000000, observed total counts = 2472.000000
[Mon Oct 31 19:09:25 2011] Offset between fit and detection position for source 33 = 0.394208 pixels
[Mon Oct 31 19:09:25 2011] 2491.960000 total counts/ 1060.050000 bgd. counts: snr = 43.979729
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.394208 pixels
  Position = (293.4, 276.6) = 13 13 1.21 -19 31 4.8
  Extent = 9.0 (8.4-9.5)", rotation angle = 0
  Source counts = 1431.9 +/- 49.9
  Background counts = 1060.0
  Rate = 0.01 +/- 0.0004
[Mon Oct 31 19:09:25 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 19:09:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 19:09:25 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 19:09:25 2011] Source does appear to be extended
[Mon Oct 31 19:09:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 21:53:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 21:53:43 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Mon Oct 31 21:53:43 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Mon Oct 31 21:53:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.04"
[Mon Oct 31 23:10:38 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Oct 31 23:10:38 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Oct 31 23:10:38 2011] Fit fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Oct 31 23:10:39 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 23:10:39 2011] fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 23:10:39 2011] Fit fullrun_mos2_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 23:11:07 2011] Warning, spatial fit 1 centroid is now closest to src. 34
[Mon Oct 31 23:11:08 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:11:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:11:08 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 23:11:08 2011] Source does appear to be extended
[Mon Oct 31 23:11:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 03:50:48 2011] Counts = 1431.910000, rescaling region sizes by 2.000000
[Tue Nov  1 03:50:48 2011] XMMSAS src. selection expression = ellipse(25479.763200, 24014.185000, 1084.962031, 1084.962031, 0.000000, X, Y)
[Tue Nov  1 03:50:48 2011] Writing source region out to fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_src.reg
[Tue Nov  1 03:50:48 2011] Extracting stamp from image fullrun_mos2_xmm0502070101_pi300-10000_cl_sm2.00.img.gz, (231, 214) - (356, 339)
[Tue Nov  1 03:50:48 2011] XMMSAS bgd. selection expression = annulus(25479.763200, 24014.185000, 3616.540104, 7233.080208, X, Y) && !ellipse(18999.002762, 31957.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.610800, 29281.558200, 539.668816, 381.727211, 42.403233, X, Y) && !ellipse(27050.870800, 24525.967000, 308.616009, 308.616009, 0.000000, X, Y) && !ellipse(22555.488200, 26050.375200, 341.643210, 341.643210, 0.000000, X, Y) && !ellipse(17444.379562, 18540.800461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.830840, 25719.805000, 398.882411, 398.882411, 0.000000, X, Y) && !ellipse(20134.575959, 20642.593300, 489.902414, 426.556183, 89.930516, X, Y) && !ellipse(30219.165863, 20067.405136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24992.155380, 19408.251200, 354.710410, 354.710410, 0.000000, X, Y) && !ellipse(30391.795400, 31597.180600, 474.270414, 474.270414, 0.000000, X, Y) && !ellipse(23975.473180, 23867.597220, 290.014408, 290.014408, 0.000000, X, Y) && !ellipse(27286.179760, 21841.934600, 220.417606, 220.417606, 0.000000, X, Y) && !ellipse(23859.680923, 31196.906528, 1040.455773, 640.967092, -0.000000, X, Y) && !ellipse(26275.537800, 27649.969400, 477.423567, 477.423567, 0.000000, X, Y) && !ellipse(23740.262000, 22963.115600, 329.376809, 329.376809, 0.000000, X, Y) && !ellipse(23616.953600, 24741.119200, 738.834421, 738.834421, 0.000000, X, Y) && !ellipse(24526.127258, 23189.466034, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov  1 03:50:48 2011] Writing fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33.gif
[Tue Nov  1 03:51:00 2011] Mean detx,y = (54.81, -57.45) 
[Tue Nov  1 03:51:02 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 03:52:43 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 03:52:43 2011] Setting source spectrum file to fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Nov  1 03:52:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Nov  1 05:04:33 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:04:33 2011] Error reading totcts from fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Nov  1 05:04:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:04:34 2011] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33.arf
[Tue Nov  1 05:04:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 05:04:34 2011] Updating source flux to 1.3e-13
[Tue Nov  1 05:08:50 2011] Reading fit data from xmm0502070101/analysis//spectral/fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_pl.csv
[Tue Nov  1 05:08:50 2011] Spectral fit parameter nH value = 8.86984e+20
[Tue Nov  1 05:08:50 2011] Spectral fit parameter PhoIndex value = 2.48438
[Tue Nov  1 05:08:50 2011] Failed to get F(0.3-8.0) from xmm0502070101/analysis//spectral/fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33_pl.csv, possibly due to different flux energy range selected
[Tue Nov  1 05:08:50 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:08:50 2011] Using Nh = 8.9e+20, photon index=2.48, rate=0.0129, arf fullrun_mos2_xmm0502070101_pi300-10000_pass1_cl_src33.arf
[Tue Nov  1 05:08:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 05:08:50 2011] Updating source flux to 1e-13