[Mon Oct 31 16:04:40 2011] Detection parameters:
  Position = (398.9, 342.9) = 13 12 28.78 -19 26 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 342.6 +/- 26.2
  Background counts = 71.1
  Rate = 0.003 +/- 0.0002

[Mon Oct 31 16:04:41 2011] Off-axis axis estimate = 7.96'
[Mon Oct 31 17:48:21 2011] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 17:48:21 2011] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Oct 31 17:48:21 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon Oct 31 17:48:21 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.41"
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Oct 31 18:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11.csv
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Oct 31 18:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11.csv
[Mon Oct 31 18:19:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Oct 31 18:19:42 2011] Fit fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Oct 31 19:09:19 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.913479 pixels away
[Mon Oct 31 19:09:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 19:09:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 19:09:19 2011] Assessing source extent using major
[Mon Oct 31 19:09:19 2011] Source does appear to be extended
[Mon Oct 31 19:09:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 21:03:00 2011] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 21:03:00 2011] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Oct 31 21:03:00 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon Oct 31 21:03:00 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 10.41"
[Mon Oct 31 21:53:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Oct 31 21:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11.csv
[Mon Oct 31 21:53:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Oct 31 21:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11.csv
[Mon Oct 31 21:53:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Oct 31 21:53:43 2011] Fit fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Oct 31 23:10:58 2011] Spatial fit model total counts = 869.633000, observed total counts = 871.000000
[Mon Oct 31 23:10:58 2011] Offset between fit and detection position for source 8 = 0.068322 pixels
[Mon Oct 31 23:10:58 2011] 867.579000 total counts/ 620.140000 bgd. counts: snr = 9.936268
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.068322 pixels
  Position = (398.8, 343.0) = 13 12 28.80 -19 26 15.8
  Extent = 6.6 (5.7-7.9)", rotation angle = 0
  Source counts = 247.4 +/- 29.5
  Background counts = 620.1
  Rate = 0.002 +/- 0.0003
[Mon Oct 31 23:10:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:10:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:10:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 23:10:58 2011] Source does appear to be extended
[Mon Oct 31 23:10:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 02:42:43 2011] XMMSAS src. selection expression = ellipse(34647.618400, 29790.234800, 397.387811, 397.387811, 0.000000, X, Y)
[Tue Nov  1 02:42:43 2011] Writing source region out to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8_src.reg
[Tue Nov  1 02:42:43 2011] Extracting stamp from image fullrun_mos1_xmm0502070101_pi300-10000_cl_sm2.00.img.gz, (376, 320) - (422, 366)
[Tue Nov  1 02:42:43 2011] XMMSAS bgd. selection expression = annulus(34647.618400, 29790.234800, 662.313019, 1324.626038, X, Y)
[Tue Nov  1 02:42:43 2011] Writing fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8.gif
[Tue Nov  1 02:47:15 2011] Mean detx,y = (-1377.30, -10921.15) 
[Tue Nov  1 02:47:16 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 02:47:25 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 02:47:25 2011] Setting source spectrum file to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Nov  1 02:47:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Nov  1 05:04:32 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:04:32 2011] Error reading totcts from fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Nov  1 05:04:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:04:33 2011] Using photon index=1.80, rate=0.00222, arf fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src8.arf
[Tue Nov  1 05:04:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 05:04:33 2011] Updating source flux to 5.2e-14