[Mon Oct 31 16:04:40 2011] Detection parameters:
  Position = (169.5, 285.1) = 13 13 39.33 -19 30 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.4 +/- 17.6
  Background counts = 81.3
  Rate = 0.002 +/- 0.0003

[Mon Oct 31 16:04:41 2011] Off-axis axis estimate = 9.40'
[Mon Oct 31 17:48:21 2011] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 17:48:21 2011] Initial guess for spatial extent in simple fitting = 11.13"
[Mon Oct 31 17:48:21 2011] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.936
[Mon Oct 31 17:48:21 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 11.13"
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Oct 31 18:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14.csv
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Oct 31 18:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14.csv
[Mon Oct 31 18:19:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Oct 31 18:19:42 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Oct 31 18:19:42 2011] Fit fullrun_mos1_xmm0502070101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Oct 31 19:09:19 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.491075 pixels away
[Mon Oct 31 19:09:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 19:09:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 19:09:19 2011] Assessing source extent using major
[Mon Oct 31 19:09:19 2011] Source does appear to be extended
[Mon Oct 31 19:09:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 21:03:00 2011] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 21:03:00 2011] Initial guess for spatial extent in simple fitting = 11.13"
[Mon Oct 31 21:03:00 2011] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.936
[Mon Oct 31 21:03:00 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 11.13"
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Oct 31 21:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14.csv
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Oct 31 21:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14.csv
[Mon Oct 31 21:53:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Oct 31 21:53:43 2011] fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Oct 31 21:53:43 2011] Fit fullrun_mos1_xmm0502070101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Oct 31 23:10:58 2011] Source 15 is offset by 6.003886 and 6.621216 pixels which is larger than
2 X fitted extent = 1.283476 x 1.283476, not incorporating fit results
[Mon Oct 31 23:10:58 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 15.151028 pixels away
[Mon Oct 31 23:10:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:10:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:10:58 2011] Assessing source extent using major
[Mon Oct 31 23:10:58 2011] Source does appear to be extended
[Mon Oct 31 23:10:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 02:42:43 2011] XMMSAS src. selection expression = ellipse(14700.878052, 24756.137756, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov  1 02:42:43 2011] Writing source region out to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15_src.reg
[Tue Nov  1 02:42:43 2011] Extracting stamp from image fullrun_mos1_xmm0502070101_pi300-10000_cl_sm2.00.img.gz, (132, 248) - (207, 323)
[Tue Nov  1 02:42:43 2011] XMMSAS bgd. selection expression = annulus(14700.878052, 24756.137756, 1087.500000, 2175.000000, X, Y) && !ellipse(16934.405340, 22147.023676, 1104.351006, 410.854386, 61.807961, X, Y) && !ellipse(16340.194600, 25203.611400, 388.483211, 388.483211, 0.000000, X, Y) && !ellipse(16290.322000, 26802.792200, 953.280027, 953.280027, 0.000000, X, Y)
[Tue Nov  1 02:42:43 2011] Writing fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15.gif
[Tue Nov  1 02:48:03 2011] Mean detx,y = (-4910.52, 9344.72) 
[Tue Nov  1 02:48:04 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 02:48:17 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 02:48:17 2011] Setting source spectrum file to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Nov  1 02:48:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Nov  1 03:32:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov  1 03:32:36 2011] rmf not generated due to insufficient counts
[Tue Nov  1 05:04:32 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:04:32 2011] Error reading totcts from fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Nov  1 05:04:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:04:33 2011] Using photon index=1.80, rate=0.00219, arf fullrun_mos1_xmm0502070101_pi300-10000_pass1_cl_src15.arf
[Tue Nov  1 05:04:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 05:04:33 2011] Updating source flux to 3.4e-14
[Tue Nov  1 05:04:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting