[Mon Jan  2 10:24:24 2012] Detection parameters:
  Position = (178.0, 263.8) = 8 0 5.45 35 14 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 13.0
  Background counts = 7.5
  Rate = 0.005 +/- 0.0006

[Mon Jan  2 10:24:24 2012] Off-axis axis estimate = 9.09'
[Mon Jan  2 12:04:12 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 12:04:12 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Jan  2 12:04:12 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Mon Jan  2 12:04:12 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.97"
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7.csv
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7.csv
[Mon Jan  2 12:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan  2 12:54:15 2012] Fit fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jan  2 12:54:33 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 14.977037 pixels away
[Mon Jan  2 12:54:34 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:54:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:54:34 2012] Assessing source extent using major
[Mon Jan  2 12:54:34 2012] Source does appear to be extended
[Mon Jan  2 12:54:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 14:22:36 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 14:22:36 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Jan  2 14:22:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Mon Jan  2 14:22:36 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.97"
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jan  2 15:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7.csv
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jan  2 15:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7.csv
[Mon Jan  2 15:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jan  2 15:09:36 2012] Fit fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jan  2 15:09:57 2012] Spatial fit model total counts = 168.994000, observed total counts = 169.000000
[Mon Jan  2 15:09:57 2012] Offset between fit and detection position for source 16 = 0.079724 pixels
[Mon Jan  2 15:09:57 2012] 167.730200 total counts/ 108.856000 bgd. counts: snr = 5.642854
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.079724 pixels
  Position = (178.0, 263.7) = 8 0 5.43 35 14 55.5
  Extent = 4.2 (3.2-5.9)", rotation angle = 0
  Source counts = 58.9 +/- 13.0
  Background counts = 108.9
  Rate = 0.003 +/- 0.0006
[Mon Jan  2 15:09:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 15:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 15:09:57 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 15:09:57 2012] Source does appear to be extended
[Mon Jan  2 15:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 16:12:36 2012] XMMSAS src. selection expression = ellipse(15438.525276, 22896.029200, 253.374007, 253.374007, 0.000000, X, Y)
[Mon Jan  2 16:12:36 2012] Writing source region out to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16_src.reg
[Mon Jan  2 16:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0502060901_pi300-10000_cl_sm2.00.img.gz, (163, 249) - (193, 278)
[Mon Jan  2 16:12:36 2012] XMMSAS bgd. selection expression = annulus(15438.525276, 22896.029200, 422.290012, 844.580024, X, Y)
[Mon Jan  2 16:12:36 2012] Writing fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16.gif
[Mon Jan  2 16:15:19 2012] Mean detx,y = (12089.43, -1568.28) 
[Mon Jan  2 16:15:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 16:15:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 16:15:31 2012] Setting source spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jan  2 16:15:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Jan  2 16:22:22 2012] Not generating rmf since there are only 58 counts
[Mon Jan  2 16:22:22 2012] rmf not generated due to insufficient counts
[Mon Jan  2 16:24:28 2012] Updating aperture counts using extracted products
[Mon Jan  2 16:24:28 2012] Error reading totcts from fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jan  2 16:24:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 16:24:29 2012] Using photon index=1.80, rate=0.0026, arf fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16.arf
[Mon Jan  2 16:24:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 16:24:29 2012] Updating source flux to 8.2e-14
[Mon Jan  2 16:25:01 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan  2 16:25:02 2012] xmm0502060901/analysis//spectral/fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete