[Mon Jan  2 10:24:24 2012] Detection parameters:
  Position = (442.7, 276.0) = 7 58 31.42 35 15 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.9 +/- 7.5
  Background counts = 7.7
  Rate = 0.002 +/- 0.0003

[Mon Jan  2 10:24:24 2012] Off-axis axis estimate = 10.59'
[Mon Jan  2 12:04:12 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 12:04:12 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Jan  2 12:04:12 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.759
[Mon Jan  2 12:04:12 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.72"
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17.csv
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17.csv
[Mon Jan  2 12:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jan  2 12:54:15 2012] Fit fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jan  2 12:54:33 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.652552 pixels away
[Mon Jan  2 12:54:34 2012] Spatial fit model total counts = 95.994300, observed total counts = 96.000000
[Mon Jan  2 12:54:34 2012] Offset between fit and detection position for source 12 = 0.621175 pixels
[Mon Jan  2 12:54:34 2012] 91.396900 total counts/ 67.535700 bgd. counts: snr = 2.903525
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.621175 pixels
  Position = (442.6, 276.6) = 7 58 31.48 35 15 51.1
  Extent = 3.7 (2.9-5.1)", rotation angle = 0
  Source counts = 23.9 +/- 9.6
  Background counts = 67.5
  Rate = 0.001 +/- 0.0004
[Mon Jan  2 12:54:34 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:54:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:54:34 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:54:34 2012] Source does appear to be extended
[Mon Jan  2 12:54:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 14:22:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 14:22:36 2012] Initial guess for spatial extent in simple fitting = 3.73"
[Mon Jan  2 14:22:36 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.219
[Mon Jan  2 14:22:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 3.73"
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jan  2 15:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15.csv
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jan  2 15:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15.csv
[Mon Jan  2 15:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jan  2 15:09:36 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jan  2 15:09:36 2012] Fit fullrun_mos2_xmm0502060901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jan  2 15:09:57 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Mon Jan  2 15:09:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 15:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 15:09:57 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 15:09:57 2012] Source does appear to be extended
[Mon Jan  2 15:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 16:12:36 2012] XMMSAS src. selection expression = ellipse(38453.607820, 24013.276480, 224.020206, 224.020206, 0.000000, X, Y)
[Mon Jan  2 16:12:36 2012] Writing source region out to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12_src.reg
[Mon Jan  2 16:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0502060901_pi300-10000_cl_sm2.00.img.gz, (430, 264) - (455, 289)
[Mon Jan  2 16:12:36 2012] XMMSAS bgd. selection expression = annulus(38453.607820, 24013.276480, 373.367011, 746.734021, X, Y)
[Mon Jan  2 16:12:36 2012] Writing fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12.gif
[Mon Jan  2 16:19:29 2012] Mean detx,y = (-10287.28, -6982.76) 
[Mon Jan  2 16:19:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 16:19:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 16:19:49 2012] Setting source spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jan  2 16:19:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jan  2 16:23:03 2012] Not generating rmf since there are only 23 counts
[Mon Jan  2 16:23:03 2012] rmf not generated due to insufficient counts
[Mon Jan  2 16:24:28 2012] Updating aperture counts using extracted products
[Mon Jan  2 16:24:28 2012] Error reading totcts from fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jan  2 16:24:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 16:24:29 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12.arf
[Mon Jan  2 16:24:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 16:24:29 2012] Updating source flux to 3.6e-14
[Mon Jan  2 16:25:01 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan  2 16:25:02 2012] xmm0502060901/analysis//spectral/fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete