[Mon Jan  2 10:24:24 2012] Detection parameters:
  Position = (277.9, 348.2) = 7 59 29.96 35 21 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.2 +/- 10.4
  Background counts = 7.2
  Rate = 0.004 +/- 0.0006

[Mon Jan  2 10:24:24 2012] Off-axis axis estimate = 3.91'
[Mon Jan  2 12:04:12 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 12:04:12 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Mon Jan  2 12:04:12 2012] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.509
[Mon Jan  2 12:04:12 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.38"
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8.csv
[Mon Jan  2 12:54:14 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jan  2 12:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8.csv
[Mon Jan  2 12:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jan  2 12:54:15 2012] fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jan  2 12:54:15 2012] Fit fullrun_mos2_xmm0502060901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jan  2 12:54:33 2012] Spatial fit model total counts = 101.585000, observed total counts = 106.000000
[Mon Jan  2 12:54:33 2012] Offset between fit and detection position for source 10 = 0.380516 pixels
[Mon Jan  2 12:54:33 2012] 97.381600 total counts/ 44.872000 bgd. counts: snr = 7.838825
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.380516 pixels
  Position = (277.9, 348.6) = 7 59 29.99 35 21 5.2
  Extent = 4.8 (3.8-6.0)", rotation angle = 0
  Source counts = 52.5 +/- 9.9
  Background counts = 44.9
  Rate = 0.002 +/- 0.0004
[Mon Jan  2 12:54:34 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:54:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:54:34 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:54:34 2012] Source does appear to be extended
[Mon Jan  2 12:54:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 14:22:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 14:22:36 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Mon Jan  2 14:22:36 2012] source mask rpix=1.1, npix_max = 10, mask sum = 4, frac = 0.390
[Mon Jan  2 14:22:36 2012] Skipping simple spatial due to low active detector fraction
[Mon Jan  2 15:09:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 15:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 15:09:57 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 15:09:57 2012] Source does appear to be extended
[Mon Jan  2 15:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 16:12:36 2012] XMMSAS src. selection expression = ellipse(24124.554840, 30281.150600, 287.690250, 287.690250, 0.000000, X, Y)
[Mon Jan  2 16:12:36 2012] Writing source region out to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10_src.reg
[Mon Jan  2 16:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0502060901_pi300-10000_cl_sm2.00.img.gz, (261, 332) - (294, 365)
[Mon Jan  2 16:12:36 2012] XMMSAS bgd. selection expression = annulus(24124.554840, 30281.150600, 479.483751, 958.967501, X, Y)
[Mon Jan  2 16:12:36 2012] Writing fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10.gif
[Mon Jan  2 16:15:36 2012] Mean detx,y = (1672.36, 3060.78) 
[Mon Jan  2 16:15:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 16:15:57 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 16:15:57 2012] Setting source spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 16:15:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jan  2 16:22:26 2012] Not generating rmf since there are only 52 counts
[Mon Jan  2 16:22:26 2012] rmf not generated due to insufficient counts
[Mon Jan  2 16:24:28 2012] Updating aperture counts using extracted products
[Mon Jan  2 16:24:28 2012] Error reading totcts from fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 16:24:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 16:24:29 2012] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10.arf
[Mon Jan  2 16:24:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 16:24:29 2012] Updating source flux to 3.8e-14
[Mon Jan  2 16:25:01 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan  2 16:25:02 2012] xmm0502060901/analysis//spectral/fullrun_mos2_xmm0502060901_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete