[Wed May 8 01:10:05 2013] Detection parameters: Position = (420.9, 218.4) = 14 38 51.10 0 11 33.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 78.4 +/- 17.5 Background counts = 94.3 Rate = 0.005 +/- 0.001 [Wed May 8 01:10:05 2013] Off-axis axis estimate = 10.61' [Wed May 8 01:12:29 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:12:29 2013] Initial guess for spatial extent in simple fitting = 11.73" [Wed May 8 01:12:29 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.027 [Wed May 8 01:12:29 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.73" [Wed May 8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6.ximg exists [Wed May 8 02:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6.csv [Wed May 8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6_1.ximg exists [Wed May 8 02:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6.csv [Wed May 8 02:29:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Wed May 8 02:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6.csv [Wed May 8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Wed May 8 02:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6.csv [Wed May 8 02:29:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 02:38:50 2013] Source 6 is offset by 7.232031 and 3.963387 pixels which is larger than 2 X fitted extent = 1.348451 x 1.348451, not incorporating fit results [Wed May 8 02:38:50 2013] Vigneting correction estimate = 1.000000 [Wed May 8 02:38:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 02:38:50 2013] Assessing source extent using major [Wed May 8 02:38:50 2013] Source does appear to be extended [Wed May 8 02:38:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 02:38:56 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting [Wed May 8 02:38:56 2013] Initial guess for spatial extent in simple fitting = 11.73" [Wed May 8 02:38:56 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.027 [Wed May 8 02:38:56 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.73" [Wed May 8 03:42:18 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6.ximg exists [Wed May 8 03:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6.csv [Wed May 8 03:42:18 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6_1.ximg exists [Wed May 8 03:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6.csv [Wed May 8 03:42:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 03:42:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Wed May 8 03:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6.csv [Wed May 8 03:42:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Wed May 8 03:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6.csv [Wed May 8 03:42:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 03:51:30 2013] Warning, spatial fit 6 centroid is now closest to src. 13 [Wed May 8 03:51:30 2013] Vigneting correction estimate = 1.000000 [Wed May 8 03:51:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 03:51:30 2013] Assessing source extent using major [Wed May 8 03:51:30 2013] Source does appear to be extended [Wed May 8 03:51:30 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 03:51:37 2013] XMMSAS src. selection expression = ellipse(36568.912689, 18952.474701, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 03:51:37 2013] Writing source region out to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_src.reg [Wed May 8 03:51:37 2013] Extracting stamp from image fullrun_pn_xmm0502060401_pi300-10000_cl_sm2.00.img.gz, (383, 181) - (458, 256) [Wed May 8 03:51:37 2013] XMMSAS bgd. selection expression = annulus(36568.912689, 18952.474701, 1087.500000, 2175.000000, X, Y) && !ellipse(39228.308000, 22268.248000, 1985.712057, 1985.712057, 0.000000, X, Y) && !ellipse(39500.832336, 20746.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39544.188965, 20136.491653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39142.188324, 20152.287750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38107.135773, 19871.517075, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 03:51:37 2013] Writing fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6.gif [Wed May 8 03:55:08 2013] Mean detx,y = (-8517.01, -8773.22) [Wed May 8 03:55:09 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 03:55:24 2013] Binned source spectrum to 10 counts/bin [Wed May 8 03:55:25 2013] Setting source spectrum file to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Wed May 8 03:55:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_bgd.pi.gz [Wed May 8 04:03:32 2013] Not generating rmf since there are only 78 counts [Wed May 8 04:03:32 2013] rmf not generated due to insufficient counts [Wed May 8 04:10:46 2013] Updating aperture counts using extracted products [Wed May 8 04:10:46 2013] Total counts from fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 362.00 [Wed May 8 04:10:46 2013] Total counts from fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1624.00 [Wed May 8 04:10:46 2013] Got source and background scale factors 1171852.000000, 4131538.000000 [Wed May 8 04:10:46 2013] User source parameters: Position = (420.9, 218.4) = 14 38 51.10 0 11 33.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -98.6 +/- 20.0 Background aperture counts = 460.6 Rate = -0.01 +/- 0.002 [Wed May 8 04:10:46 2013] Updating counts from extracted products [Wed May 8 04:10:46 2013] Set source signif. to -98.62/21.46 = -4.60 [Wed May 8 04:10:48 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 04:10:48 2013] Using photon index=1.80, rate=-0.0107, arf fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6.arf [Wed May 8 04:10:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 04:10:48 2013] Updated flux is not positive, keeping original flux [Wed May 8 04:10:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 04:10:54 2013] xmm0502060401/analysis//spectral/fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete