[Wed May  8 01:10:05 2013] Detection parameters:
  Position = (456.3, 250.5) = 14 38 40.82 0 13 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 18.1
  Background counts = 89.3
  Rate = 0.005 +/- 0.001

[Wed May  8 01:10:05 2013] Off-axis axis estimate = 11.96'
[Wed May  8 01:12:29 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Wed May  8 01:12:29 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Wed May  8 01:12:29 2013] source mask rpix=2.9, npix_max = 44, mask sum = 49, frac = 1.090
[Wed May  8 01:12:29 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.41"
[Wed May  8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src5.ximg exists
[Wed May  8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May  8 02:29:19 2013] Fit fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed May  8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May  8 02:29:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  8 02:29:19 2013] Fit fullrun_pn_xmm0502060401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May  8 02:38:50 2013] Spatial fit model total counts = 818.740000, observed total counts = 764.000000
[Wed May  8 02:38:50 2013] Offset between fit and detection position for source 5 = 7.763397 pixels
[Wed May  8 02:38:50 2013] 805.880000 total counts/ 553.724000 bgd. counts: snr = 10.715751
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 7.763397 pixels
  Position = (451.5, 256.5) = 14 38 42.23 0 14 19.2
  Extent = 24.8 (16.8-49.6)", rotation angle = 0
  Source counts = 252.2 +/- 28.4
  Background counts = 553.7
  Rate = 0.03 +/- 0.003
[Wed May  8 02:38:50 2013] Vigneting correction estimate = 1.000000
[Wed May  8 02:38:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 02:38:50 2013] Assessing source extent using major axis lower bound
[Wed May  8 02:38:50 2013] Source does appear to be extended
[Wed May  8 02:38:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 02:38:50 2013] Source is confused with source 4
[Wed May  8 02:38:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 02:38:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 02:38:56 2013] Initial guess for spatial extent in simple fitting = 24.82"
[Wed May  8 02:38:56 2013] source mask rpix=5.7, npix_max = 154, mask sum = 169, frac = 1.097
[Wed May  8 02:38:56 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 24.82"
[Wed May  8 03:42:18 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5.ximg exists
[Wed May  8 03:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5.csv
[Wed May  8 03:42:18 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May  8 03:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5.csv
[Wed May  8 03:42:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:42:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May  8 03:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May  8 03:42:19 2013] fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May  8 03:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May  8 03:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502060401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:51:30 2013] Warning, spatial fit 5 centroid is now closest to src. 7
[Wed May  8 03:51:30 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.079144 pixels away
[Wed May  8 03:51:30 2013] Vigneting correction estimate = 1.000000
[Wed May  8 03:51:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 03:51:30 2013] Assessing source extent using major axis lower bound
[Wed May  8 03:51:30 2013] Source does appear to be extended
[Wed May  8 03:51:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 03:51:37 2013] XMMSAS src. selection expression = ellipse(39228.308000, 22268.248000, 1489.284043, 1489.284043, 0.000000, X, Y)
[Wed May  8 03:51:37 2013] Writing source region out to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_src.reg
[Wed May  8 03:51:37 2013] Extracting stamp from image fullrun_pn_xmm0502060401_pi300-10000_cl_sm2.00.img.gz, (366, 171) - (537, 342)
[Wed May  8 03:51:37 2013] XMMSAS bgd. selection expression = annulus(39228.308000, 22268.248000, 2482.140071, 4964.280143, X, Y) && !ellipse(41876.233948, 21268.326660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40597.128448, 22034.327835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36568.912689, 18952.474701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39500.832336, 20746.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41019.920624, 20586.556290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40482.537384, 20367.475220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40066.877220, 20163.602000, 758.051222, 758.051222, 0.000000, X, Y) && !ellipse(39544.188965, 20136.491653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39142.188324, 20152.287750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38107.135773, 19871.517075, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 03:51:37 2013] Writing fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5.gif
[Wed May  8 03:54:00 2013] Mean detx,y = (-12091.49, -6716.99) 
[Wed May  8 03:54:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 03:54:58 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 03:54:58 2013] Setting source spectrum file to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May  8 03:54:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May  8 04:10:46 2013] Updating aperture counts using extracted products
[Wed May  8 04:10:46 2013] Total counts from fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2220.00
[Wed May  8 04:10:46 2013] Total counts from fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 12654.00
[Wed May  8 04:10:46 2013] Got source and background scale factors 6106330.000000, 34376770.000000
[Wed May  8 04:10:46 2013] User source parameters:
  Position = (451.5, 256.5) = 14 38 42.23 0 14 19.2
  Extent = 24.8 (16.8-49.6)", rotation angle = 0
  Source aperture counts = -27.7 +/- 48.1
  Background aperture counts = 2247.7
  Rate = -0.003 +/- 0.005

[Wed May  8 04:10:48 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 04:10:48 2013] Using photon index=1.80, rate=0.0273, arf fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5.arf
[Wed May  8 04:10:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 04:10:48 2013] Updating source flux to 1.9e-13
[Wed May  8 04:10:52 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed May  8 04:10:54 2013] xmm0502060401/analysis//spectral/fullrun_pn_xmm0502060401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete