[Sun Apr  1 15:31:03 2012] Detection parameters:
  Position = (249.2, 240.0) = 8 40 57.10 38 35 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.5 +/- 15.0
  Background counts = 20.7
  Rate = 0.009 +/- 0.001

[Sun Apr  1 15:31:03 2012] Off-axis axis estimate = 5.54'
[Sun Apr  1 15:33:55 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun Apr  1 15:33:55 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Sun Apr  1 15:33:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Sun Apr  1 15:33:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.20"
[Sun Apr  1 16:02:15 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Apr  1 16:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11.csv
[Sun Apr  1 16:02:15 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Apr  1 16:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11.csv
[Sun Apr  1 16:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 16:02:15 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Apr  1 16:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Apr  1 16:02:15 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Apr  1 16:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Apr  1 16:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502060201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 16:57:05 2012] Warning, spatial fit 11 centroid is now closest to src. 13
[Sun Apr  1 16:57:05 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 16:57:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 16:57:05 2012] Assessing source extent using major
[Sun Apr  1 16:57:05 2012] Source does appear to be extended
[Sun Apr  1 16:57:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 16:57:22 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sun Apr  1 16:57:22 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Sun Apr  1 16:57:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Sun Apr  1 16:57:22 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.20"
[Sun Apr  1 17:29:55 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Apr  1 17:29:55 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Apr  1 17:29:55 2012] Fit fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Apr  1 17:29:55 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Apr  1 17:29:55 2012] fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Apr  1 17:29:55 2012] Fit fullrun_pn_xmm0502060201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Apr  1 18:26:14 2012] Spatial fit model total counts = 319.342000, observed total counts = 302.000000
[Sun Apr  1 18:26:14 2012] Offset between fit and detection position for source 12 = 0.048960 pixels
[Sun Apr  1 18:26:14 2012] 316.185300 total counts/ 228.950000 bgd. counts: snr = 5.765300
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.048960 pixels
  Position = (249.2, 240.1) = 8 40 57.10 38 35 47.2
  Extent = 5.6 (4.6-7.0)", rotation angle = 0
  Source counts = 87.2 +/- 17.8
  Background counts = 228.9
  Rate = 0.005 +/- 0.001
[Sun Apr  1 18:26:14 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 18:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 18:26:14 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 18:26:14 2012] Source does appear to be extended
[Sun Apr  1 18:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 18:26:33 2012] XMMSAS src. selection expression = ellipse(21632.128080, 20838.520600, 336.154810, 336.154810, 0.000000, X, Y)
[Sun Apr  1 18:26:33 2012] Writing source region out to fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12_src.reg
[Sun Apr  1 18:26:33 2012] Extracting stamp from image fullrun_pn_xmm0502060201_pi300-10000_cl_sm2.00.img.gz, (230, 221) - (269, 259)
[Sun Apr  1 18:26:33 2012] XMMSAS bgd. selection expression = annulus(21632.128080, 20838.520600, 560.258016, 1120.516032, X, Y) && !ellipse(20597.954330, 20228.002548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22696.773800, 19584.339200, 329.496809, 329.496809, 0.000000, X, Y)
[Sun Apr  1 18:26:33 2012] Writing fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12.gif
[Sun Apr  1 18:39:51 2012] Mean detx,y = (4663.41, -1914.86) 
[Sun Apr  1 18:39:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  1 18:40:24 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  1 18:40:25 2012] Setting source spectrum file to fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Apr  1 18:40:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Apr  1 19:03:25 2012] Not generating rmf since there are only 87 counts
[Sun Apr  1 19:03:25 2012] rmf not generated due to insufficient counts
[Sun Apr  1 19:28:38 2012] Updating aperture counts using extracted products
[Sun Apr  1 19:28:38 2012] Error reading totcts from fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Apr  1 19:28:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 19:28:39 2012] Using photon index=1.80, rate=0.00504, arf fullrun_pn_xmm0502060201_pi300-10000_pass1_cl_src12.arf
[Sun Apr  1 19:28:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 19:28:39 2012] Updating source flux to 1.9e-14
[Sun Apr  1 19:28:55 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting