[Fri Aug 17 13:58:07 2012] Detection parameters:
  Position = (251.1, 386.1) = 12 14 29.89 14 11 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.6 +/- 15.0
  Background counts = 81.0
  Rate = 0.002 +/- 0.0006

[Fri Aug 17 13:58:07 2012] Off-axis axis estimate = 7.22'
[Fri Aug 17 15:19:30 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:19:30 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Fri Aug 17 15:19:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.015
[Fri Aug 17 15:19:30 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.04"
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20.csv
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20.csv
[Fri Aug 17 16:00:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Aug 17 16:00:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:00:58 2012] Spatial fit model total counts = 265.757000, observed total counts = 234.000000
[Fri Aug 17 16:00:58 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 16:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:00:58 2012] Assessing source extent using major
[Fri Aug 17 16:00:58 2012] Source does appear to be extended
[Fri Aug 17 16:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:00:58 2012] Deleting source due to low Poisson probability 0.9