[Fri Aug 17 13:58:07 2012] Detection parameters:
  Position = (276.5, 284.9) = 12 14 22.28 14 3 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.4 +/- 20.9
  Background counts = 100.3
  Rate = 0.003 +/- 0.0005

[Fri Aug 17 13:58:07 2012] Off-axis axis estimate = 1.87'
[Fri Aug 17 15:19:30 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:19:30 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Aug 17 15:19:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Fri Aug 17 15:19:30 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.36"
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14.csv
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14.csv
[Fri Aug 17 16:00:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 17 16:00:45 2012] Fit fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Aug 17 16:00:58 2012] Source 10 is offset by 5.648308 and 0.791450 pixels which is larger than
2 X fitted extent = 1.267499 x 1.267499, not incorporating fit results
[Fri Aug 17 16:00:58 2012] Source 10 is offset by 7.278124 and -6.159768 pixels which is larger than
2 X fitted extent = 6.769793 x 6.769793, not incorporating fit results
[Fri Aug 17 16:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:00:58 2012] Assessing source extent using major
[Fri Aug 17 16:00:58 2012] Source does appear to be extended
[Fri Aug 17 16:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:41:17 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:41:17 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Aug 17 16:41:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Fri Aug 17 16:41:17 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.36"
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug 17 17:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12.csv
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug 17 17:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12.csv
[Fri Aug 17 17:07:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 17 17:07:15 2012] Fit fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Aug 17 17:07:24 2012] Spatial fit model total counts = 116.503000, observed total counts = 3520.000000
[Fri Aug 17 17:07:24 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 17:07:24 2012] Source 10 is offset by 7.278124 and -6.142228 pixels which is larger than
2 X fitted extent = 6.769793 x 6.769793, not incorporating fit results
[Fri Aug 17 17:07:24 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:07:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:07:24 2012] Assessing source extent using major
[Fri Aug 17 17:07:24 2012] Source does appear to be extended
[Fri Aug 17 17:07:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 17:07:24 2012] Deleting source due to low Poisson probability 0.9