[Fri Aug 17 13:58:07 2012] Detection parameters:
  Position = (291.7, 275.3) = 12 14 17.73 14 3 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65059.8 +/- 297.0
  Background counts = 103.7
  Rate = 2 +/- 0.007

[Fri Aug 17 13:58:07 2012] Off-axis axis estimate = 1.75'
[Fri Aug 17 15:19:30 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 15:19:30 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Aug 17 15:19:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Aug 17 15:19:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 16:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 16:00:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 16:00:45 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 16:00:45 2012] Fit fullrun_mos2_xmm0502050201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 16:00:58 2012] Spatial fit model total counts = 50523.700000, observed total counts = 49756.000000
[Fri Aug 17 16:00:58 2012] Offset between fit and detection position for source 1 = 0.199208 pixels
[Fri Aug 17 16:00:58 2012] 50686.400000 total counts/ 10890.100000 bgd. counts: snr = 381.352644
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.199208 pixels
  Position = (291.8, 275.5) = 12 14 17.72 14 3 13.9
  Extent = 5.5 (5.5-5.5)", rotation angle = 0
  Source counts = 39796.3 +/- 225.1
  Background counts = 10890.1
  Rate = 1 +/- 0.006
[Fri Aug 17 16:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 16:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 16:00:58 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 16:00:58 2012] Source does appear to be extended
[Fri Aug 17 16:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:41:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:41:17 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Fri Aug 17 16:41:17 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.966
[Fri Aug 17 16:41:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 17:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 17:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 17:07:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 17:07:15 2012] fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 17:07:15 2012] Fit fullrun_mos2_xmm0502050201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 17:07:24 2012] Spatial fit model total counts = 50088.400000, observed total counts = 49599.000000
[Fri Aug 17 17:07:24 2012] Offset between fit and detection position for source 1 = 0.012820 pixels
[Fri Aug 17 17:07:24 2012] 50477.100000 total counts/ 10817.000000 bgd. counts: snr = 381.329488
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012820 pixels
  Position = (291.8, 275.5) = 12 14 17.73 14 3 13.9
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 39660.1 +/- 224.7
  Background counts = 10817.0
  Rate = 1 +/- 0.006
[Fri Aug 17 17:07:24 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:07:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:07:24 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 17:07:24 2012] Source does appear to be extended
[Fri Aug 17 17:07:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 19:03:49 2012] Counts = 39660.100000, rescaling region sizes by 3.000000
[Fri Aug 17 19:03:49 2012] XMMSAS src. selection expression = ellipse(25334.652800, 23917.340600, 982.171828, 982.171828, 0.000000, X, Y)
[Fri Aug 17 19:03:49 2012] Writing source region out to fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 17 19:03:49 2012] Extracting stamp from image fullrun_mos2_xmm0502050201_pi300-10000_cl_sm2.00.img.gz, (235, 219) - (348, 332)
[Fri Aug 17 19:03:49 2012] XMMSAS bgd. selection expression = annulus(25334.652800, 23917.340600, 4910.859141, 9821.718283, X, Y) && !ellipse(22756.231628, 23628.631775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24907.593903, 23332.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14821.198669, 27875.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16101.402023, 16519.790833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35584.884491, 15716.297989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.876984, 23771.244019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.100037, 17000.380341, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 19:03:49 2012] Writing fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 17 19:03:56 2012] Mean detx,y = (-104.20, -14.12) 
[Fri Aug 17 19:03:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 19:06:45 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 19:06:46 2012] Setting source spectrum file to fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 19:06:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 17 19:14:10 2012] Updating aperture counts using extracted products
[Fri Aug 17 19:14:10 2012] Error reading totcts from fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 19:14:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 19:14:10 2012] Using photon index=1.80, rate=1.03, arf fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 19:14:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 19:14:10 2012] Updating source flux to 1e-11
[Fri Aug 17 19:15:02 2012] Reading fit data from xmm0502050201/analysis//spectral/fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug 17 19:15:02 2012] Spectral fit parameter nH value = 1.81354e+13
[Fri Aug 17 19:15:02 2012] Spectral fit parameter PhoIndex value = 2.38944
[Fri Aug 17 19:15:02 2012] Failed to get F(0.3-8.0) from xmm0502050201/analysis//spectral/fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 19:15:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 19:15:02 2012] Using Nh = 1.8e+13, photon index=2.39, rate=1.03, arf fullrun_mos2_xmm0502050201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 19:15:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 19:15:02 2012] Updating source flux to 8.4e-12