[Sat Dec 31 17:22:12 2011] Detection parameters:
  Position = (292.1, 275.9) = 12 14 17.66 14 3 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341210.3 +/- 667.1
  Background counts = 226.6
  Rate = 6 +/- 0.01

[Sat Dec 31 17:22:13 2011] Off-axis axis estimate = 1.70'
[Sat Dec 31 17:32:29 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 17:32:29 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Dec 31 17:32:29 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Dec 31 17:32:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Dec 31 19:14:15 2011] fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 31 19:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1.csv
[Sat Dec 31 19:14:15 2011] fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 31 19:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1.csv
[Sat Dec 31 19:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 19:14:15 2011] fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 31 19:14:15 2011] fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 31 19:14:15 2011] Fit fullrun_pn_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Dec 31 22:35:54 2011] Spatial fit model total counts = 270831.000000, observed total counts = 284601.000000
[Sat Dec 31 22:35:54 2011] Offset between fit and detection position for source 2 = 0.133539 pixels
[Sat Dec 31 22:35:54 2011] 270456.000000 total counts/ 25600.000000 bgd. counts: snr = 1530.350000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.133539 pixels
  Position = (292.1, 275.7) = 12 14 17.67 14 3 13.8
  Extent = 6.6 (6.5-6.6)", rotation angle = 0
  Source counts = 244856.0 +/- 520.1
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Sat Dec 31 22:35:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:35:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:35:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:35:54 2011] Source does appear to be extended
[Sat Dec 31 22:35:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:36:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 22:36:26 2011] Initial guess for spatial extent in simple fitting = 6.56"
[Sat Dec 31 22:36:26 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Sat Dec 31 22:36:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.56"
[Sun Jan  1 00:51:37 2012] fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jan  1 00:51:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 00:51:37 2012] fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jan  1 00:51:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 00:51:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 00:51:38 2012] fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jan  1 00:51:38 2012] fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jan  1 00:51:38 2012] Fit fullrun_pn_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jan  1 04:50:37 2012] Spatial fit model total counts = 271246.000000, observed total counts = 284691.000000
[Sun Jan  1 04:50:37 2012] Offset between fit and detection position for source 2 = 0.010184 pixels
[Sun Jan  1 04:50:37 2012] 271173.000000 total counts/ 25600.000000 bgd. counts: snr = 1534.831250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010184 pixels
  Position = (292.1, 275.7) = 12 14 17.67 14 3 13.8
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 245573.0 +/- 520.7
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Sun Jan  1 04:50:37 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 04:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 04:50:37 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 04:50:37 2012] Source does appear to be extended
[Sun Jan  1 04:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 04:51:06 2012] Counts = 245573.000000, rescaling region sizes by 3.000000
[Sun Jan  1 04:51:06 2012] XMMSAS src. selection expression = ellipse(25365.485160, 23938.826600, 1183.699834, 1183.699834, 0.000000, X, Y)
[Sun Jan  1 04:51:06 2012] Writing source region out to fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jan  1 04:51:06 2012] Extracting stamp from image fullrun_pn_xmm0502050101_pi300-10000_cl_sm2.00.img.gz, (224, 208) - (360, 344)
[Sun Jan  1 04:51:06 2012] XMMSAS bgd. selection expression = annulus(25365.485160, 23938.826600, 5918.499170, 11836.998341, X, Y) && !ellipse(18709.717407, 18213.773865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27058.690674, 18799.355179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22791.740000, 23651.319800, 477.909614, 477.909614, 0.000000, X, Y) && !ellipse(22749.416168, 27102.838501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31300.542600, 25094.284000, 801.160023, 480.280814, 313.170360, X, Y) && !ellipse(30384.900800, 22796.990000, 419.127212, 419.127212, 0.000000, X, Y) && !ellipse(27830.423200, 31576.140400, 437.442413, 437.442413, 0.000000, X, Y) && !ellipse(22875.689362, 30511.994354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.581400, 29943.505000, 454.752013, 454.752013, 0.000000, X, Y) && !ellipse(21273.154220, 29102.024000, 532.596015, 532.596015, 0.000000, X, Y) && !ellipse(34559.623688, 28750.472687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.383520, 28680.782200, 386.595211, 386.595211, 0.000000, X, Y) && !ellipse(16736.851540, 26956.660400, 532.596015, 532.596015, 0.000000, X, Y) && !ellipse(15848.479950, 26429.910706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14503.977600, 26321.476400, 586.990417, 586.990417, 0.000000, X, Y) && !ellipse(17506.151474, 24461.787933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28075.481934, 16055.181946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26585.585693, 23041.195923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21993.027200, 22623.013200, 500.552014, 500.552014, 0.000000, X, Y) && !ellipse(25185.499200, 21816.256000, 1274.624037, 1274.624037, 0.000000, X, Y) && !ellipse(26144.463196, 22738.328766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.276000, 22214.716000, 1240.928036, 1240.928036, 0.000000, X, Y) && !ellipse(24273.562286, 21979.307663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26493.311400, 21258.308600, 347.324810, 347.324810, 0.000000, X, Y) && !ellipse(24226.385800, 20995.676300, 401.307212, 401.307212, 0.000000, X, Y) && !ellipse(27284.200897, 19139.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16152.325485, 16580.103806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17909.928329, 15713.881912, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:51:06 2012] Writing fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2.gif
[Sun Jan  1 04:58:51 2012] Mean detx,y = (251.52, -100.13) 
[Sun Jan  1 04:59:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 05:07:06 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 05:07:08 2012] Setting source spectrum file to fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jan  1 05:07:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jan  1 16:02:46 2012] Updating aperture counts using extracted products
[Sun Jan  1 16:02:46 2012] Error reading totcts from fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jan  1 16:02:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 16:02:48 2012] Using photon index=1.80, rate=5.16, arf fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2.arf
[Sun Jan  1 16:02:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 16:02:48 2012] Updating source flux to 1.1e-11
[Sun Jan  1 16:09:55 2012] Reading fit data from xmm0502050101/analysis//spectral/fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jan  1 16:09:55 2012] Spectral fit parameter nH value = 7.19559e+12
[Sun Jan  1 16:09:55 2012] Spectral fit parameter PhoIndex value = 2.72843
[Sun Jan  1 16:09:55 2012] Failed to get F(0.3-8.0) from xmm0502050101/analysis//spectral/fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 16:09:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 16:09:55 2012] Using Nh = 7.2e+12, photon index=2.73, rate=5.16, arf fullrun_pn_xmm0502050101_pi300-10000_pass1_cl_src2.arf
[Sun Jan  1 16:09:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 16:09:55 2012] Updating source flux to 7.1e-12