[Sat Dec 31 17:23:47 2011] Detection parameters:
  Position = (281.2, 273.8) = 12 14 20.93 14 3 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.3 +/- 30.8
  Background counts = 71.0
  Rate = 0.004 +/- 0.0005

[Sat Dec 31 17:23:48 2011] Off-axis axis estimate = 2.18'
[Sat Dec 31 20:01:52 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 20:01:52 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Sat Dec 31 20:01:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sat Dec 31 20:01:52 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.52"
[Sat Dec 31 22:35:41 2011] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Dec 31 22:35:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10.csv
[Sat Dec 31 22:35:41 2011] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Dec 31 22:35:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10.csv
[Sat Dec 31 22:35:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:35:42 2011] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Dec 31 22:35:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Dec 31 22:35:42 2011] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Dec 31 22:35:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Dec 31 22:35:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:36:10 2011] Spatial fit model total counts = 4123.750000, observed total counts = 4738.000000
[Sat Dec 31 22:36:10 2011] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Dec 31 22:36:10 2011] Spatial fit model total counts = 1453.030000, observed total counts = 1453.000000
[Sat Dec 31 22:36:10 2011] Offset between fit and detection position for source 17 = 5.420405 pixels
[Sat Dec 31 22:36:10 2011] Warning, changing simple spatial fit ID from 10 to 16
[Sat Dec 31 22:36:10 2011] 1380.706000 total counts/ 961.676000 bgd. counts: snr = 13.512345
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 5.420405 pixels
  Position = (281.8, 279.2) = 12 14 20.76 14 3 29.0
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 419.0 +/- 37.2
  Background counts = 961.7
  Rate = 0.008 +/- 0.0007
[Sat Dec 31 22:36:10 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:36:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:36:10 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 22:36:10 2011] Source does appear to be extended
[Sat Dec 31 22:36:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:36:10 2011] Source is confused with source 14
[Sun Jan  1 02:52:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 02:52:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 02:52:41 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Sun Jan  1 02:52:41 2012] source mask rpix=3.4, npix_max = 60, mask sum = 45, frac = 0.745
[Sun Jan  1 02:52:41 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.73"
[Sun Jan  1 04:50:26 2012] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jan  1 04:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10.csv
[Sun Jan  1 04:50:26 2012] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jan  1 04:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10.csv
[Sun Jan  1 04:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 04:50:27 2012] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jan  1 04:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jan  1 04:50:27 2012] fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jan  1 04:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jan  1 04:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502050101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 04:50:51 2012] Warning, spatial fit 10 centroid is now closest to src. 15
[Sun Jan  1 04:50:51 2012] Spatial fit model total counts = 1460.370000, observed total counts = 1453.000000
[Sun Jan  1 04:50:51 2012] Offset between fit and detection position for source 17 = 0.000000 pixels
[Sun Jan  1 04:50:51 2012] Warning, changing simple spatial fit ID from 10 to 15
[Sun Jan  1 04:50:51 2012] 1397.793000 total counts/ 985.566000 bgd. counts: snr = 13.130872
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.000000 pixels
  Position = (281.8, 279.2) = 12 14 20.76 14 3 29.0
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 412.2 +/- 37.4
  Background counts = 985.6
  Rate = 0.008 +/- 0.0007
[Sun Jan  1 04:50:51 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 04:50:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 04:50:51 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 04:50:51 2012] Source does appear to be extended
[Sun Jan  1 04:50:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 15:09:44 2012] XMMSAS src. selection expression = ellipse(24465.692000, 24244.308000, 883.788025, 883.788025, 0.000000, X, Y)
[Sun Jan  1 15:09:44 2012] Writing source region out to fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17_src.reg
[Sun Jan  1 15:09:44 2012] Extracting stamp from image fullrun_mos2_xmm0502050101_pi300-10000_cl_sm2.00.img.gz, (231, 228) - (333, 330)
[Sun Jan  1 15:09:44 2012] XMMSAS bgd. selection expression = annulus(24465.692000, 24244.308000, 1472.980042, 2945.960085, X, Y) && !ellipse(25359.941760, 23946.166180, 1352.978439, 1352.978439, 0.000000, X, Y) && !ellipse(22773.271400, 23662.279000, 365.500011, 365.500011, 0.000000, X, Y) && !ellipse(24924.697601, 23338.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23954.597687, 24817.922943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.422394, 21266.144226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.158722, 22554.388336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23153.129303, 24386.584229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23199.111755, 25348.405762, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 15:09:44 2012] Writing fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17.gif
[Sun Jan  1 15:20:09 2012] Mean detx,y = (-321.01, -255.61) 
[Sun Jan  1 15:20:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 15:20:57 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 15:20:58 2012] Setting source spectrum file to fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jan  1 15:20:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jan  1 16:02:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 16:02:54 2012] Error reading totcts from fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jan  1 16:02:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 16:02:55 2012] Using photon index=1.80, rate=0.008, arf fullrun_mos2_xmm0502050101_pi300-10000_pass1_cl_src17.arf
[Sun Jan  1 16:02:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 16:02:55 2012] Updating source flux to 8e-14
[Sun Jan  1 16:04:23 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Sun Jan  1 16:04:23 2012] Flag c found in src. 17 procflags, skipping spectral fitting