[Wed Mar 14 12:30:49 2012] Detection parameters:
  Position = (279.5, 284.8) = 21 43 3.24 6 54 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2446.6 +/- 59.0
  Background counts = 7.7
  Rate = 0.3 +/- 0.008

[Wed Mar 14 12:30:49 2012] Off-axis axis estimate = 1.69'
[Wed Mar 14 12:47:45 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 12:47:45 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Mar 14 12:47:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Wed Mar 14 12:47:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Mar 14 13:04:28 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 14 13:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1.csv
[Wed Mar 14 13:04:28 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 14 13:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1.csv
[Wed Mar 14 13:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:04:28 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 14 13:04:28 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 14 13:04:28 2012] Fit fullrun_mos2_xmm0502041801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 14 13:04:36 2012] Spatial fit model total counts = 2261.720000, observed total counts = 2186.000000
[Wed Mar 14 13:04:36 2012] Offset between fit and detection position for source 2 = 0.136758 pixels
[Wed Mar 14 13:04:36 2012] 2259.586000 total counts/ 568.406000 bgd. counts: snr = 70.934989
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.136758 pixels
  Position = (279.5, 284.7) = 21 43 3.25 6 54 17.8
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1691.2 +/- 47.5
  Background counts = 568.4
  Rate = 0.2 +/- 0.006
[Wed Mar 14 13:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:04:36 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 13:04:36 2012] Source does appear to be extended
[Wed Mar 14 13:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 13:19:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 13:19:01 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Wed Mar 14 13:19:01 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.739
[Wed Mar 14 13:19:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Wed Mar 14 13:33:18 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 14 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 13:33:18 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 14 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 13:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:33:18 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 14 13:33:18 2012] fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 14 13:33:18 2012] Fit fullrun_mos2_xmm0502041801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 14 13:33:25 2012] Spatial fit model total counts = 2252.110000, observed total counts = 2178.000000
[Wed Mar 14 13:33:25 2012] Offset between fit and detection position for source 2 = 0.018796 pixels
[Wed Mar 14 13:33:25 2012] 2261.295000 total counts/ 561.455000 bgd. counts: snr = 71.738215
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.018796 pixels
  Position = (279.5, 284.6) = 21 43 3.25 6 54 17.7
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1699.8 +/- 47.6
  Background counts = 561.5
  Rate = 0.2 +/- 0.006
[Wed Mar 14 13:33:25 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:33:25 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 13:33:25 2012] Source does appear to be extended
[Wed Mar 14 13:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 13:58:17 2012] Counts = 1699.840000, rescaling region sizes by 2.000000
[Wed Mar 14 13:58:17 2012] XMMSAS src. selection expression = ellipse(24265.100200, 24715.432800, 654.056419, 654.056419, 0.000000, X, Y)
[Wed Mar 14 13:58:17 2012] Writing source region out to fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 14 13:58:17 2012] Extracting stamp from image fullrun_mos2_xmm0502041801_pi300-10000_cl_sm2.00.img.gz, (242, 247) - (317, 322)
[Wed Mar 14 13:58:17 2012] XMMSAS bgd. selection expression = annulus(24265.100200, 24715.432800, 2180.188063, 4360.376125, X, Y)
[Wed Mar 14 13:58:17 2012] Writing fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2.gif
[Wed Mar 14 13:58:21 2012] Mean detx,y = (58.79, 61.82) 
[Wed Mar 14 13:58:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 13:58:55 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 13:58:55 2012] Setting source spectrum file to fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 14 13:58:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 14 14:06:39 2012] Updating aperture counts using extracted products
[Wed Mar 14 14:06:39 2012] Error reading totcts from fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 14 14:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 14:06:39 2012] Using photon index=1.80, rate=0.218, arf fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2.arf
[Wed Mar 14 14:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 14:06:39 2012] Updating source flux to 2.4e-12
[Wed Mar 14 14:07:16 2012] Reading fit data from xmm0502041801/analysis//spectral/fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar 14 14:07:16 2012] Spectral fit parameter nH value = 2.24533e+21
[Wed Mar 14 14:07:16 2012] Spectral fit parameter PhoIndex value = 6.87268
[Wed Mar 14 14:07:16 2012] Failed to get F(0.3-8.0) from xmm0502041801/analysis//spectral/fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar 14 14:07:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 14:07:16 2012] Using Nh = 2.2e+21, photon index=6.87, rate=0.218, arf fullrun_mos2_xmm0502041801_pi300-10000_pass1_cl_src2.arf
[Wed Mar 14 14:07:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 14:07:16 2012] Updating source flux to 1.5e-12