Processing completion:

Field: xmm0502041401

Detector Exposure (Original/High-E Flare Cleaned/Low-E Cleaned) Image binning Plate scale ("/pixel) Bgd. level (orig/High-E flare cleaned/cleaned, counts/sq. arcmin/s) GTI file Bgd. light curves Roll angle CCD counts Extra info
mos1 7811 | 7811 | 7808 1.00 4.35 0/0 Yes orig clean ccd1:2185 ccd2:1636 ccd3:1857 ccd4:1564 ccd5:2006 ccd7:1642 filter=Thin1
object=RX J2143.0+0654
mos2 7816 | 7816 | 7808 1.00 4.35 0/0 Yes orig clean ccd1:2452 ccd2:1551 ccd3:1697 ccd4:1476 ccd5:2431 ccd6:2133 ccd7:1767 filter=Thin1
object=RX J2143.0+0654
pn 7671 | 7671 | 7671 1.00 4.35 0/0 Yes orig clean ccd4:11209 filter=Thin1
object=RX J2143.0+0654

Source List (gives positions and fluxes and links for detailed analyses)

20 source(s) in memory
Iteration: 2
|mos1 |mos2 |pn |
init Complete
acquire Complete
reduce Complete
detect Complete
timeclean Complete
simplespatial Complete
assess Complete
extract Complete
reassess Complete
spectral Complete
temporal Complete
spatial Complete
correl Skip
sim Skip
qlook Skip
xray image
skyview image

Xray image, smoothed with a 2 pixel gaussian

Skyview image(s) of FOV (with X-ray sources marked)

Color code (marks may only appear on detector-specific images for multi-detector missions, see links above): green = point source, red = problematic/questionable source, blue = extended source, magenta = asymmetric source (may be extended), cyan = estimated detector boundary, purple = "Region of Interest" (if set)

Python version = 2.5.4 (r254:67916, Aug 14 2009, 18:07:15) [GCC 4.1.1 20070105 (Red Hat 4.1.1-52)]
Headas version = 6.11
XAssist version = 1.000
SAS version = xmmsas_20110223_1801-11.0.0
numpy version = 1.3.0
Pyfits version = 2.1.1
XAssist originally started on this data set at Fri Mar 9 09:55:04 2012
This data set was last accessed on Fri Mar 9 09:55:04 2012
Current user = xassist on x3.localdomain
Number of fields in memory = 1
Current field being processed = xmm0502041401
Position of field target = 21 43 3.30 6 54 17.0
Current telescope = xmm
Current detector = all
Processing mode = proc
Processing status = OK
Detection method = eboxdetect
Batch processing enabled
Place data, logs, etc. in field subdirectories
Image analysis will be over range of allowed energies
Will analyze each ccd separately

Log files: processing messages |error messages |all messages (very detailed) |source logs