[Fri Mar  9 10:10:17 2012] Detection parameters:
  Position = (319.2, 310.9) = 21 43 3.45 6 54 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2589.7 +/- 60.5
  Background counts = 6.6
  Rate = 0.3 +/- 0.008

[Fri Mar  9 10:10:18 2012] Off-axis axis estimate = 1.75'
[Fri Mar  9 10:40:23 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 10:40:23 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Mar  9 10:40:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Fri Mar  9 10:40:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Mar  9 11:02:17 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar  9 11:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 11:02:17 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar  9 11:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 11:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 11:02:17 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar  9 11:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar  9 11:02:17 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar  9 11:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar  9 11:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 11:02:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.420016 pixels away
[Fri Mar  9 11:02:25 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 11:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 11:02:25 2012] Assessing source extent using major
[Fri Mar  9 11:02:25 2012] Source does appear to be extended
[Fri Mar  9 11:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 11:33:44 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 11:33:44 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Mar  9 11:33:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Fri Mar  9 11:33:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Fri Mar  9 11:52:43 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar  9 11:52:43 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar  9 11:52:43 2012] Fit fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Mar  9 11:52:43 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar  9 11:52:43 2012] fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar  9 11:52:43 2012] Fit fullrun_mos2_xmm0502041401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar  9 11:52:51 2012] Spatial fit model total counts = 2360.010000, observed total counts = 2289.000000
[Fri Mar  9 11:52:51 2012] Offset between fit and detection position for source 2 = 0.184805 pixels
[Fri Mar  9 11:52:51 2012] 2355.943000 total counts/ 601.163000 bgd. counts: snr = 71.569265
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.184805 pixels
  Position = (319.0, 310.8) = 21 43 3.50 6 54 18.5
  Extent = 5.3" x 4.8", rotation angle = 0
  Source counts = 1754.8 +/- 48.5
  Background counts = 601.2
  Rate = 0.2 +/- 0.006
[Fri Mar  9 11:52:51 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 11:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 11:52:51 2012] Assessing source extent using major
[Fri Mar  9 11:52:51 2012] Source does appear to be extended
[Fri Mar  9 11:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Fri Mar  9 12:19:37 2012] Counts = 1754.780000, rescaling region sizes by 2.000000
[Fri Mar  9 12:19:37 2012] XMMSAS src. selection expression = ellipse(27703.606719, 26990.806209, 641.238349, 578.037934, 0.000000, X, Y)
[Fri Mar  9 12:19:37 2012] Writing source region out to fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_src.reg
[Fri Mar  9 12:19:37 2012] Extracting stamp from image fullrun_mos2_xmm0502041401_pi300-10000_cl_sm2.00.img.gz, (282, 274) - (356, 348)
[Fri Mar  9 12:19:37 2012] XMMSAS bgd. selection expression = annulus(27703.606719, 26990.806209, 2137.461164, 4274.922329, X, Y)
[Fri Mar  9 12:19:37 2012] Writing fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2.gif
[Fri Mar  9 12:19:40 2012] Mean detx,y = (64.79, 127.51) 
[Fri Mar  9 12:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 12:20:33 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 12:20:33 2012] Setting source spectrum file to fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar  9 12:20:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar  9 12:29:43 2012] Updating aperture counts using extracted products
[Fri Mar  9 12:29:43 2012] Error reading totcts from fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar  9 12:29:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 12:29:44 2012] Using photon index=1.80, rate=0.225, arf fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2.arf
[Fri Mar  9 12:29:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 12:29:44 2012] Updating source flux to 2.5e-12
[Fri Mar  9 12:30:42 2012] Reading fit data from xmm0502041401/analysis//spectral/fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_pl.csv
[Fri Mar  9 12:30:42 2012] Spectral fit parameter nH value = 2.30395e+21
[Fri Mar  9 12:30:42 2012] Spectral fit parameter PhoIndex value = 6.92884
[Fri Mar  9 12:30:42 2012] Failed to get F(0.3-8.0) from xmm0502041401/analysis//spectral/fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Mar  9 12:30:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 12:30:42 2012] Using Nh = 2.3e+21, photon index=6.93, rate=0.225, arf fullrun_mos2_xmm0502041401_pi300-10000_pass1_cl_src2.arf
[Fri Mar  9 12:30:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 12:30:42 2012] Updating source flux to 1.6e-12