[Fri Mar 16 05:32:16 2012] Detection parameters:
  Position = (376.8, 221.5) = 21 42 46.12 6 47 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14.6 +/- 4.9
  Background counts = 1.7
  Rate = 0.005 +/- 0.002

[Fri Mar 16 05:32:16 2012] Off-axis axis estimate = 7.96'
[Fri Mar 16 05:46:53 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 05:46:53 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Fri Mar 16 05:46:53 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Fri Mar 16 05:46:53 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.41"
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Mar 16 05:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Mar 16 05:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 05:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Mar 16 05:58:01 2012] Fit fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Mar 16 05:58:04 2012] Spatial fit model total counts = 31.386600, observed total counts = 31.000000
[Fri Mar 16 05:58:04 2012] Offset between fit and detection position for source 6 = 0.754917 pixels
[Fri Mar 16 05:58:04 2012] 31.552400 total counts/ 15.269100 bgd. counts: snr = 4.167117
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.754917 pixels
  Position = (376.8, 220.7) = 21 42 46.11 6 47 39.9
  Extent = 7.6 (3.1-11.6)", rotation angle = 0
  Source counts = 16.3 +/- 5.6
  Background counts = 15.3
  Rate = 0.004 +/- 0.001
[Fri Mar 16 05:58:04 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 05:58:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 05:58:04 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 05:58:04 2012] Source does appear to be extended
[Fri Mar 16 05:58:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:09:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 06:09:18 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri Mar 16 06:09:18 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Fri Mar 16 06:09:18 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.56"
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Mar 16 06:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6.csv
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Mar 16 06:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6.csv
[Fri Mar 16 06:19:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Mar 16 06:19:48 2012] Fit fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Mar 16 06:19:52 2012] Spatial fit model total counts = 30.999800, observed total counts = 31.000000
[Fri Mar 16 06:19:52 2012] Offset between fit and detection position for source 6 = 0.147099 pixels
[Fri Mar 16 06:19:52 2012] 30.935200 total counts/ 14.811600 bgd. counts: snr = 4.189489
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.147099 pixels
  Position = (376.8, 220.9) = 21 42 46.13 6 47 40.5
  Extent = 7.6 (2.9-12.1)", rotation angle = 0
  Source counts = 16.1 +/- 5.6
  Background counts = 14.8
  Rate = 0.003 +/- 0.001
[Fri Mar 16 06:19:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:19:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:19:52 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 06:19:52 2012] Source does appear to be extended
[Fri Mar 16 06:19:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:33:34 2012] XMMSAS src. selection expression = ellipse(32729.779400, 19167.437280, 453.436213, 453.436213, 0.000000, X, Y)
[Fri Mar 16 06:33:34 2012] Writing source region out to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6_src.reg
[Fri Mar 16 06:33:34 2012] Extracting stamp from image fullrun_mos2_xmm0502041301_pi300-10000_cl_sm2.00.img.gz, (351, 195) - (403, 247)
[Fri Mar 16 06:33:34 2012] XMMSAS bgd. selection expression = annulus(32729.779400, 19167.437280, 755.727022, 1511.454043, X, Y) && !ellipse(35084.461914, 17308.769958, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 06:33:34 2012] Writing fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6.gif
[Fri Mar 16 06:34:49 2012] Mean detx,y = (-7571.24, -5535.81) 
[Fri Mar 16 06:34:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:35:13 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:35:13 2012] Setting source spectrum file to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Mar 16 06:35:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Mar 16 06:39:29 2012] Not generating rmf since there are only 16 counts
[Fri Mar 16 06:39:29 2012] rmf not generated due to insufficient counts
[Fri Mar 16 06:39:38 2012] Updating aperture counts using extracted products
[Fri Mar 16 06:39:38 2012] Error reading totcts from fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Mar 16 06:39:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 06:39:38 2012] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src6.arf
[Fri Mar 16 06:39:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 06:39:38 2012] Updating source flux to 5.5e-14
[Fri Mar 16 06:39:46 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting