[Fri Mar 16 05:32:16 2012] Detection parameters:
  Position = (462.4, 248.7) = 21 42 21.10 6 49 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 9.8
  Background counts = 1.5
  Rate = 0.01 +/- 0.002

[Fri Mar 16 05:32:16 2012] Off-axis axis estimate = 12.42'
[Fri Mar 16 05:46:53 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 05:46:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 05:46:53 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Fri Mar 16 05:46:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Fri Mar 16 05:46:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.64"
[Fri Mar 16 05:58:00 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Mar 16 05:58:00 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Mar 16 05:58:00 2012] Fit fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Mar 16 05:58:01 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Mar 16 05:58:01 2012] Fit fullrun_mos2_xmm0502041301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Mar 16 05:58:04 2012] Spatial fit model total counts = 72.999700, observed total counts = 73.000000
[Fri Mar 16 05:58:04 2012] Offset between fit and detection position for source 1 = 0.369571 pixels
[Fri Mar 16 05:58:04 2012] 74.675000 total counts/ 32.154800 bgd. counts: snr = 7.498465
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.369571 pixels
  Position = (462.1, 248.6) = 21 42 21.20 6 49 40.8
  Extent = 4.8 (3.9-6.7)", rotation angle = 0
  Source counts = 42.5 +/- 8.6
  Background counts = 32.2
  Rate = 0.009 +/- 0.002
[Fri Mar 16 05:58:04 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 05:58:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 05:58:04 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 05:58:04 2012] Source does appear to be extended
[Fri Mar 16 05:58:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:09:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 06:09:18 2012] Initial guess for spatial extent in simple fitting = 4.83"
[Fri Mar 16 06:09:18 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.157
[Fri Mar 16 06:09:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.83"
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 16 06:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 16 06:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 06:19:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 16 06:19:48 2012] fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 16 06:19:48 2012] Fit fullrun_mos2_xmm0502041301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Mar 16 06:19:52 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Mar 16 06:19:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:19:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:19:52 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 06:19:52 2012] Source does appear to be extended
[Fri Mar 16 06:19:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:33:34 2012] XMMSAS src. selection expression = ellipse(40154.925200, 21576.728800, 289.819208, 289.819208, 0.000000, X, Y)
[Fri Mar 16 06:33:34 2012] Writing source region out to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 06:33:34 2012] Extracting stamp from image fullrun_mos2_xmm0502041301_pi300-10000_cl_sm2.00.img.gz, (445, 232) - (479, 265)
[Fri Mar 16 06:33:34 2012] XMMSAS bgd. selection expression = annulus(40154.925200, 21576.728800, 483.032014, 966.064028, X, Y)
[Fri Mar 16 06:33:34 2012] Writing fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 06:34:21 2012] Mean detx,y = (-13651.38, -619.38) 
[Fri Mar 16 06:34:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:34:26 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:34:26 2012] Setting source spectrum file to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 06:34:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 06:39:17 2012] Not generating rmf since there are only 42 counts
[Fri Mar 16 06:39:17 2012] rmf not generated due to insufficient counts
[Fri Mar 16 06:39:38 2012] Updating aperture counts using extracted products
[Fri Mar 16 06:39:38 2012] Error reading totcts from fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 06:39:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 06:39:38 2012] Using photon index=1.80, rate=0.00914, arf fullrun_mos2_xmm0502041301_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 06:39:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 06:39:38 2012] Updating source flux to 2.3e-13
[Fri Mar 16 06:39:46 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting