[Wed Mar 21 21:54:25 2012] Detection parameters:
  Position = (402.3, 200.0) = 21 42 38.24 6 45 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.8 +/- 16.3
  Background counts = 4.2
  Rate = 0.03 +/- 0.003

[Wed Mar 21 21:54:25 2012] Off-axis axis estimate = 10.38'
[Wed Mar 21 22:00:49 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 22:00:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 22:00:49 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Wed Mar 21 22:00:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Wed Mar 21 22:00:49 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.62"
[Wed Mar 21 22:17:45 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 21 22:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 21 22:17:45 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 21 22:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2.csv
[Wed Mar 21 22:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:17:46 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 21 22:17:46 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 21 22:17:46 2012] Fit fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Mar 21 22:40:36 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.270131 pixels away
[Wed Mar 21 22:40:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 22:40:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 22:40:36 2012] Assessing source extent using major
[Wed Mar 21 22:40:36 2012] Source does appear to be extended
[Wed Mar 21 22:40:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:43:17 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 22:43:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 22:43:17 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Wed Mar 21 22:43:17 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Wed Mar 21 22:43:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.62"
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 21 22:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 21 22:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2.csv
[Wed Mar 21 22:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 21 22:58:02 2012] Fit fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 21 23:17:54 2012] Spatial fit model total counts = 204.000000, observed total counts = 204.000000
[Wed Mar 21 23:17:54 2012] Offset between fit and detection position for source 8 = 0.020752 pixels
[Wed Mar 21 23:17:54 2012] 201.557400 total counts/ 85.367400 bgd. counts: snr = 12.575427
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.020752 pixels
  Position = (402.3, 200.0) = 21 42 38.25 6 45 59.3
  Extent = 5.4 (4.5-6.4)", rotation angle = 0
  Source counts = 116.2 +/- 14.2
  Background counts = 85.4
  Rate = 0.01 +/- 0.001
[Wed Mar 21 23:17:54 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 23:17:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 23:17:54 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 23:17:54 2012] Source does appear to be extended
[Wed Mar 21 23:17:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 23:27:23 2012] XMMSAS src. selection expression = ellipse(34954.244000, 17354.882800, 322.602609, 322.602609, 0.000000, X, Y)
[Wed Mar 21 23:27:23 2012] Writing source region out to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8_src.reg
[Wed Mar 21 23:27:23 2012] Extracting stamp from image fullrun_mos1_xmm0502041201_pi300-10000_cl_sm2.00.img.gz, (384, 181) - (421, 219)
[Wed Mar 21 23:27:23 2012] XMMSAS bgd. selection expression = annulus(34954.244000, 17354.882800, 537.671015, 1075.342031, X, Y)
[Wed Mar 21 23:27:23 2012] Writing fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8.gif
[Wed Mar 21 23:27:54 2012] Mean detx,y = (-7338.35, 9577.97) 
[Wed Mar 21 23:27:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:28:09 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:28:09 2012] Setting source spectrum file to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar 21 23:28:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Mar 21 23:57:23 2012] Updating aperture counts using extracted products
[Wed Mar 21 23:57:23 2012] Error reading totcts from fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar 21 23:57:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 23:57:23 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src8.arf
[Wed Mar 21 23:57:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 23:57:23 2012] Updating source flux to 2.3e-13