[Wed Mar 21 21:54:25 2012] Detection parameters:
  Position = (375.4, 223.1) = 21 42 46.13 6 47 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.3 +/- 10.0
  Background counts = 4.8
  Rate = 0.01 +/- 0.002

[Wed Mar 21 21:54:25 2012] Off-axis axis estimate = 7.80'
[Wed Mar 21 22:00:49 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 22:00:49 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Wed Mar 21 22:00:49 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.726
[Wed Mar 21 22:00:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.33"
[Wed Mar 21 22:17:45 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 21 22:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3.csv
[Wed Mar 21 22:17:45 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 21 22:17:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3.csv
[Wed Mar 21 22:17:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:17:46 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 21 22:17:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 21 22:17:46 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 21 22:17:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 21 22:17:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:40:36 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.691856 pixels away
[Wed Mar 21 22:40:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 22:40:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 22:40:36 2012] Assessing source extent using major
[Wed Mar 21 22:40:36 2012] Source does appear to be extended
[Wed Mar 21 22:40:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:43:17 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 22:43:17 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Wed Mar 21 22:43:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.726
[Wed Mar 21 22:43:17 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.33"
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Mar 21 22:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3.csv
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Mar 21 22:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3.csv
[Wed Mar 21 22:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Mar 21 22:58:02 2012] fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Mar 21 22:58:02 2012] Fit fullrun_mos1_xmm0502041201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Mar 21 23:17:54 2012] Spatial fit model total counts = 99.528900, observed total counts = 98.000000
[Wed Mar 21 23:17:54 2012] Offset between fit and detection position for source 7 = 0.164921 pixels
[Wed Mar 21 23:17:54 2012] 104.381500 total counts/ 33.901000 bgd. counts: snr = 12.104942
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.164921 pixels
  Position = (375.3, 223.3) = 21 42 46.14 6 47 40.5
  Extent = 7.2 (5.5-9.8)", rotation angle = 0
  Source counts = 70.5 +/- 10.2
  Background counts = 33.9
  Rate = 0.007 +/- 0.001
[Wed Mar 21 23:17:54 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 23:17:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 23:17:54 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 23:17:54 2012] Source does appear to be extended
[Wed Mar 21 23:17:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 23:27:23 2012] XMMSAS src. selection expression = ellipse(32604.091000, 19378.027600, 432.233412, 432.233412, 0.000000, X, Y)
[Wed Mar 21 23:27:23 2012] Writing source region out to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7_src.reg
[Wed Mar 21 23:27:23 2012] Extracting stamp from image fullrun_mos1_xmm0502041201_pi300-10000_cl_sm2.00.img.gz, (350, 198) - (400, 248)
[Wed Mar 21 23:27:23 2012] XMMSAS bgd. selection expression = annulus(32604.091000, 19378.027600, 720.389021, 1440.778041, X, Y)
[Wed Mar 21 23:27:23 2012] Writing fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7.gif
[Wed Mar 21 23:28:13 2012] Mean detx,y = (-5988.65, 6834.60) 
[Wed Mar 21 23:28:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:28:31 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:28:31 2012] Setting source spectrum file to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 21 23:28:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar 21 23:41:44 2012] Not generating rmf since there are only 70 counts
[Wed Mar 21 23:41:44 2012] rmf not generated due to insufficient counts
[Wed Mar 21 23:57:23 2012] Updating aperture counts using extracted products
[Wed Mar 21 23:57:23 2012] Error reading totcts from fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 21 23:57:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 23:57:23 2012] Using photon index=1.80, rate=0.00733, arf fullrun_mos1_xmm0502041201_pi300-10000_pass1_cl_src7.arf
[Wed Mar 21 23:57:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 23:57:23 2012] Updating source flux to 1.2e-13
[Wed Mar 21 23:57:25 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting