[Sun Dec 25 02:16:32 2011] Detection parameters:
  Position = (420.6, 440.0) = 21 42 32.86 7 3 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.5 +/- 8.4
  Background counts = 3.5
  Rate = 0.004 +/- 0.0007

[Sun Dec 25 02:16:32 2011] Off-axis axis estimate = 13.56'
[Sun Dec 25 02:29:03 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:29:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 02:29:03 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Sun Dec 25 02:29:03 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.120
[Sun Dec 25 02:29:03 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 13.21"
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 02:56:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Dec 25 02:56:30 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Dec 25 03:32:10 2011] Spatial fit model total counts = 76.996400, observed total counts = 77.000000
[Sun Dec 25 03:32:10 2011] Offset between fit and detection position for source 9 = 0.229532 pixels
[Sun Dec 25 03:32:10 2011] 77.159700 total counts/ 38.344700 bgd. counts: snr = 6.268259
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.229532 pixels
  Position = (420.6, 440.2) = 21 42 32.87 7 3 25.7
  Extent = 7.7 (5.6-10.1)", rotation angle = 0
  Source counts = 38.8 +/- 8.8
  Background counts = 38.3
  Rate = 0.003 +/- 0.0008
[Sun Dec 25 03:32:10 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:32:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:32:10 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 03:32:10 2011] Source does appear to be extended
[Sun Dec 25 03:32:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:35:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:35:30 2011] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Dec 25 03:35:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.204
[Sun Dec 25 03:35:30 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.74"
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7.ximg exists
[Sun Dec 25 04:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7.csv
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Dec 25 04:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7.csv
[Sun Dec 25 04:04:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Dec 25 04:04:47 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Dec 25 04:32:31 2011] Warning, spatial fit 7 centroid is now closest to src. 8
[Sun Dec 25 04:32:31 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:32:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:32:31 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:32:31 2011] Source does appear to be extended
[Sun Dec 25 04:32:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:43:35 2011] XMMSAS src. selection expression = ellipse(36540.937480, 38252.763000, 464.268613, 464.268613, 0.000000, X, Y)
[Sun Dec 25 04:43:35 2011] Writing source region out to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9_src.reg
[Sun Dec 25 04:43:35 2011] Extracting stamp from image fullrun_mos1_xmm0502041101_pi300-10000_cl_sm2.00.img.gz, (394, 414) - (447, 467)
[Sun Dec 25 04:43:35 2011] XMMSAS bgd. selection expression = annulus(36540.937480, 38252.763000, 773.781022, 1547.562045, X, Y)
[Sun Dec 25 04:43:35 2011] Writing fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9.gif
[Sun Dec 25 04:46:44 2011] Mean detx,y = (13269.09, 5674.67) 
[Sun Dec 25 04:46:47 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 04:47:12 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 04:47:12 2011] Setting source spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Dec 25 04:47:12 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Dec 25 05:06:10 2011] Not generating rmf since there are only 38 counts
[Sun Dec 25 05:06:10 2011] rmf not generated due to insufficient counts
[Sun Dec 25 05:19:25 2011] Updating aperture counts using extracted products
[Sun Dec 25 05:19:25 2011] Error reading totcts from fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Dec 25 05:19:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 05:19:25 2011] Using photon index=1.80, rate=0.00347, arf fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src9.arf
[Sun Dec 25 05:19:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 05:19:25 2011] Updating source flux to 7.5e-14
[Sun Dec 25 05:19:28 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting