[Sun Dec 25 02:16:32 2011] Detection parameters:
  Position = (502.3, 260.7) = 21 42 9.01 6 50 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 6.8
  Background counts = 4.1
  Rate = 0.003 +/- 0.0006

[Sun Dec 25 02:16:32 2011] Off-axis axis estimate = 15.03'
[Sun Dec 25 02:29:03 2011] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:29:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 02:29:03 2011] Initial guess for spatial extent in simple fitting = 13.95"
[Sun Dec 25 02:29:03 2011] source mask rpix=3.2, npix_max = 54, mask sum = 43, frac = 0.783
[Sun Dec 25 02:29:03 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 13.95"
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9.csv
[Sun Dec 25 02:56:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Dec 25 02:56:30 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Dec 25 03:32:10 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.979782 pixels away
[Sun Dec 25 03:32:10 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:32:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:32:10 2011] Assessing source extent using major
[Sun Dec 25 03:32:10 2011] Source does appear to be extended
[Sun Dec 25 03:32:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:35:30 2011] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:35:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 03:35:30 2011] Initial guess for spatial extent in simple fitting = 13.95"
[Sun Dec 25 03:35:30 2011] source mask rpix=3.2, npix_max = 54, mask sum = 43, frac = 0.783
[Sun Dec 25 03:35:30 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 13.95"
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Dec 25 04:04:47 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Dec 25 04:04:47 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Dec 25 04:32:31 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.979782 pixels away
[Sun Dec 25 04:32:31 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:32:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:32:31 2011] Assessing source extent using major
[Sun Dec 25 04:32:31 2011] Source does appear to be extended
[Sun Dec 25 04:32:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:43:35 2011] XMMSAS src. selection expression = ellipse(43653.975189, 22631.880676, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 04:43:35 2011] Writing source region out to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2_src.reg
[Sun Dec 25 04:43:35 2011] Extracting stamp from image fullrun_mos1_xmm0502041101_pi300-10000_cl_sm2.00.img.gz, (465, 223) - (540, 298)
[Sun Dec 25 04:43:35 2011] XMMSAS bgd. selection expression = annulus(43653.975189, 22631.880676, 1087.500000, 2175.000000, X, Y)
[Sun Dec 25 04:43:35 2011] Writing fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2.gif
[Sun Dec 25 04:47:18 2011] Mean detx,y = (-36.32, 16515.66) 
[Sun Dec 25 04:47:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 04:48:19 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 04:48:20 2011] Setting source spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 25 04:48:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Dec 25 05:06:15 2011] Not generating rmf since there are only 31 counts
[Sun Dec 25 05:06:15 2011] rmf not generated due to insufficient counts
[Sun Dec 25 05:19:25 2011] Updating aperture counts using extracted products
[Sun Dec 25 05:19:25 2011] Error reading totcts from fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 25 05:19:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 05:19:25 2011] Using photon index=1.80, rate=0.00281, arf fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src2.arf
[Sun Dec 25 05:19:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 05:19:25 2011] Updating source flux to 1.1e-13
[Sun Dec 25 05:19:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting