[Sun Dec 25 02:16:32 2011] Detection parameters:
  Position = (316.3, 313.8) = 21 43 3.33 6 54 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3490.7 +/- 70.1
  Background counts = 7.2
  Rate = 0.3 +/- 0.007

[Sun Dec 25 02:16:32 2011] Off-axis axis estimate = 1.71'
[Sun Dec 25 02:29:03 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:29:03 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Dec 25 02:29:03 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sun Dec 25 02:29:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 02:56:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 02:56:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 02:56:30 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 02:56:30 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 03:32:10 2011] Spatial fit model total counts = 3092.000000, observed total counts = 3092.000000
[Sun Dec 25 03:32:10 2011] Offset between fit and detection position for source 1 = 0.221044 pixels
[Sun Dec 25 03:32:10 2011] 3091.693000 total counts/ 723.293000 bgd. counts: snr = 88.063901
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.221044 pixels
  Position = (316.2, 313.7) = 21 43 3.38 6 54 15.1
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2368.4 +/- 55.6
  Background counts = 723.3
  Rate = 0.2 +/- 0.005
[Sun Dec 25 03:32:10 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:32:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:32:10 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 03:32:10 2011] Source does appear to be extended
[Sun Dec 25 03:32:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:35:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:35:30 2011] Initial guess for spatial extent in simple fitting = 5.05"
[Sun Dec 25 03:35:30 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Sun Dec 25 03:35:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 04:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 04:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 04:04:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 04:04:47 2011] fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 04:04:47 2011] Fit fullrun_mos1_xmm0502041101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 04:32:31 2011] Spatial fit model total counts = 3091.890000, observed total counts = 3092.000000
[Sun Dec 25 04:32:31 2011] Offset between fit and detection position for source 1 = 0.000166 pixels
[Sun Dec 25 04:32:31 2011] 3091.559000 total counts/ 721.879000 bgd. counts: snr = 88.197749
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000166 pixels
  Position = (316.2, 313.7) = 21 43 3.38 6 54 15.1
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2369.7 +/- 55.6
  Background counts = 721.9
  Rate = 0.2 +/- 0.005
[Sun Dec 25 04:32:31 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:32:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:32:31 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:32:31 2011] Source does appear to be extended
[Sun Dec 25 04:32:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:43:35 2011] Counts = 2369.680000, rescaling region sizes by 2.000000
[Sun Dec 25 04:43:35 2011] XMMSAS src. selection expression = ellipse(27458.997960, 27240.453600, 607.360817, 607.360817, 0.000000, X, Y)
[Sun Dec 25 04:43:35 2011] Writing source region out to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 04:43:35 2011] Extracting stamp from image fullrun_mos1_xmm0502041101_pi300-10000_cl_sm2.00.img.gz, (281, 279) - (351, 349)
[Sun Dec 25 04:43:35 2011] XMMSAS bgd. selection expression = annulus(27458.997960, 27240.453600, 2024.536058, 4049.072117, X, Y)
[Sun Dec 25 04:43:35 2011] Writing fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 04:43:39 2011] Mean detx,y = (273.41, -224.67) 
[Sun Dec 25 04:43:42 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 04:44:26 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 04:44:27 2011] Setting source spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 04:44:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 05:19:24 2011] Updating aperture counts using extracted products
[Sun Dec 25 05:19:24 2011] Error reading totcts from fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 05:19:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 05:19:25 2011] Using photon index=1.80, rate=0.212, arf fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 05:19:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 05:19:25 2011] Updating source flux to 2e-12
[Sun Dec 25 05:20:00 2011] Reading fit data from xmm0502041101/analysis//spectral/fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 25 05:20:00 2011] Spectral fit parameter nH value = 2.31489e+21
[Sun Dec 25 05:20:00 2011] Spectral fit parameter PhoIndex value = 7.04038
[Sun Dec 25 05:20:00 2011] Failed to get F(0.3-8.0) from xmm0502041101/analysis//spectral/fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 25 05:20:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 05:20:00 2011] Using Nh = 2.3e+21, photon index=7.04, rate=0.212, arf fullrun_mos1_xmm0502041101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 05:20:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 05:20:00 2011] Updating source flux to 1.3e-12