[Thu Mar 22 08:42:57 2012] Detection parameters:
  Position = (401.6, 200.0) = 21 42 38.19 6 45 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.3 +/- 15.5
  Background counts = 3.5
  Rate = 0.03 +/- 0.003

[Thu Mar 22 08:42:57 2012] Off-axis axis estimate = 10.34'
[Thu Mar 22 09:05:58 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 09:05:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 09:05:58 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Thu Mar 22 09:05:58 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Thu Mar 22 09:05:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.60"
[Thu Mar 22 09:26:43 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2.ximg exists
[Thu Mar 22 09:26:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2.csv
[Thu Mar 22 09:26:43 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Mar 22 09:26:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2.csv
[Thu Mar 22 09:26:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:26:43 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Mar 22 09:26:43 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Mar 22 09:26:43 2012] Fit fullrun_mos2_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Mar 22 09:26:50 2012] Spatial fit model total counts = 171.329000, observed total counts = 171.000000
[Thu Mar 22 09:26:50 2012] Offset between fit and detection position for source 1 = 0.206980 pixels
[Thu Mar 22 09:26:50 2012] 171.237300 total counts/ 55.708300 bgd. counts: snr = 15.478578
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.206980 pixels
  Position = (401.4, 200.0) = 21 42 38.25 6 45 59.1
  Extent = 5.6 (4.7-6.6)", rotation angle = 0
  Source counts = 115.5 +/- 13.1
  Background counts = 55.7
  Rate = 0.01 +/- 0.002
[Thu Mar 22 09:26:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:26:50 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 09:26:50 2012] Source does appear to be extended
[Thu Mar 22 09:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:42:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 09:42:24 2012] Initial guess for spatial extent in simple fitting = 5.61"
[Thu Mar 22 09:42:24 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938
[Thu Mar 22 09:42:24 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.61"
[Thu Mar 22 10:03:18 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2.ximg exists
[Thu Mar 22 10:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2.csv
[Thu Mar 22 10:03:18 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Mar 22 10:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2.csv
[Thu Mar 22 10:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 10:03:18 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Mar 22 10:03:18 2012] fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Mar 22 10:03:18 2012] Fit fullrun_mos2_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Mar 22 10:03:28 2012] Spatial fit model total counts = 171.132000, observed total counts = 171.000000
[Thu Mar 22 10:03:28 2012] Offset between fit and detection position for source 1 = 0.014052 pixels
[Thu Mar 22 10:03:28 2012] 171.046800 total counts/ 55.591800 bgd. counts: snr = 15.484863
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014052 pixels
  Position = (401.4, 200.0) = 21 42 38.25 6 45 59.0
  Extent = 5.6 (4.7-6.6)", rotation angle = 0
  Source counts = 115.5 +/- 13.1
  Background counts = 55.6
  Rate = 0.01 +/- 0.002
[Thu Mar 22 10:03:28 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 10:03:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 10:03:28 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 10:03:28 2012] Source does appear to be extended
[Thu Mar 22 10:03:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:27:37 2012] XMMSAS src. selection expression = ellipse(34874.467600, 17350.526600, 336.631810, 336.631810, 0.000000, X, Y)
[Thu Mar 22 10:27:37 2012] Writing source region out to fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 10:27:37 2012] Extracting stamp from image fullrun_mos2_xmm0502041001_pi300-10000_cl_sm2.00.img.gz, (382, 181) - (421, 219)
[Thu Mar 22 10:27:37 2012] XMMSAS bgd. selection expression = annulus(34874.467600, 17350.526600, 561.053016, 1122.106032, X, Y)
[Thu Mar 22 10:27:37 2012] Writing fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 10:31:10 2012] Mean detx,y = (-9561.19, -7791.77) 
[Thu Mar 22 10:31:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 10:31:31 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 10:31:31 2012] Setting source spectrum file to fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 10:31:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 10:44:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 10:44:14 2012] Error reading totcts from fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 10:44:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 10:44:14 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 10:44:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 10:44:14 2012] Updating source flux to 3.1e-13
[Thu Mar 22 10:44:59 2012] Reading fit data from xmm0502041001/analysis//spectral/fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 22 10:44:59 2012] Spectral fit parameter nH value = 1.82367e+20
[Thu Mar 22 10:44:59 2012] Spectral fit parameter PhoIndex value = 1.54546
[Thu Mar 22 10:44:59 2012] Failed to get F(0.3-8.0) from xmm0502041001/analysis//spectral/fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 10:44:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 10:44:59 2012] Using Nh = 1.8e+20, photon index=1.55, rate=0.0134, arf fullrun_mos2_xmm0502041001_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 10:44:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 10:44:59 2012] Updating source flux to 3.6e-13